Butyllithium Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R14/15:Reagiert heftig mit Wasser unter Bildung hochentzündlicher Gase.
R17:Selbstentzündlich an der Luft. Spontaneously flammable in air.
R34:Verursacht Ver?tzungen.
R48/20:Gesundheitssch?dlich: Gefahr ernster Gesundheitssch?den bei l?ngerer Exposition durch Einatmen.
R51/53:Giftig für Wasserorganismen, kann in Gew?ssern l?ngerfristig sch?dliche Wirkungen haben.
R62:Kann m?glicherweise die Fortpflanzungsf?higkeit beeintr?chtigen.
R65:Gesundheitssch?dlich: kann beim Verschlucken Lungensch?den verursachen.
R67:D?mpfe k?nnen Schl?frigkeit und Benommenheit verursachen.
R63:Kann das Kind im Mutterleib m?glicherweise sch?digen.
R35:Verursacht schwere Ver?tzungen.
R11:Leichtentzündlich.
R15:Reagiert mit Wasser unter Bildung hochentzündlicher Gase.
R50/53:Sehr giftig für Wasserorganismen, kann in Gew?ssern l?ngerfristig sch?dliche Wirkungen haben.
R66:Wiederholter Kontakt kann zu spr?der oder rissiger Haut führen.
S-S?tze Betriebsanweisung:
S6:Unter . . . aufbewahren (inertes Gas vom Hersteller anzugeben).
S9:Beh?lter an einem gut gelüfteten Ort aufbewahren.
S16:Von Zündquellen fernhalten - Nicht rauchen.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S61:Freisetzung in die Umwelt vermeiden. Besondere Anweisungen einholen/Sicherheitsdatenblatt zu Rate ziehen.
S62:Bei Verschlucken kein Erbrechen herbeiführen. Sofort ?rztlichen Rat einholen und Verpackung oder dieses Etikett vorzeigen.
S46:Bei Verschlucken sofort ?rztlichen Rat einholen und Verpackung oder Etikett vorzeigen.
S43:Zum L?schen . . . (vom Hersteller anzugeben) verwenden (wenn Wasser die Gefahr erh?ht, anfügen: "Kein Wasser verwenden").
S60:Dieses Produkt und sein Beh?lter sind als gef?hrlicher Abfall zu entsorgen.
S33:Ma?nahmen gegen elektrostatische Aufladungen treffen.
S29:Nicht in die Kanalisation gelangen lassen.
S5:Unter . . . aufbewahren (geeignete Flüssigkeit vom Hersteller anzugeben).
Aussehen Eigenschaften
C4H9Li; Lithiumbutyl. Lösung in n-Hexan. Gelbliche Flüssigkeit mit charakteristischem Geruch.
Gefahren für Mensch und Umwelt
Verursacht Verätzungen. Gefahr ernster Gesundheitsschäden bei längerer Exposition durch Einatmen. Gesundheitsschädlich. Kann möglicherweise die Fortpflanzungsfähigkeit beeinträchtigen
Nicht mit Wasser, Oxidationsmitteln, Alkoholen oder Säuren in Berührung bringen.
Leichtentzündlich.
Reagiert heftigmit Wasser unter Bildung hochentzündlicher Gase.
Selbstentzündlich an der Luft.
Schutzma?nahmen und Verhaltensregeln
Geeignete Schutzhandschuhe als kurzzeitiger Spritzschutz.
Verhalten im Gefahrfall
Mit flüssigkeitsbindendem Material aufnehmen. Der Entsorgung zuführen. Nachreinigen.
Natriumchlorid, Kalksteinpulver, Natriumhydrogencarbonat oder trockener Sand.
Ungeeignete Löschmittel: Wasser, Kohlendioxid, Halon.
Brennbar. Mit Luft Bildung explosionsfähiger Gemische. Mischung mit brennbaren Bestandteilen. Arbeitsplatz trocken halten.
Erste Hilfe
Nach Hautkontakt: Mit reichlich Wasser abwaschen. Abtupfen mit Polyethylenglycol 400.
Nach Augenkontakt: Bei geöffnetem Lidspalt mit reichlich fliessendem Wasser (Augendusche!) mindestens 15 Minuten ausspülen. Sofort Augenarzt hinzuziehen.
Nach Einatmen: Frischluft. Sofort Arzt hinzuziehen.
Nach Verschlucken: Viel Wasser trinken lassen. Flüssiges Paraffin zu trinken geben. Erbrechen wegen Aspirationsgefahr vermeiden. Sofort Arzt hinzuziehen.
Nach Kleidungskontakt: Kontaminierte Kleidung sofort entfernen. Entzündungsgefahr!
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
In trockenem, inertem Lösemittel, z.B. Hexan vorlegen, vorsichtig mit trockenem Butanol versetzen. Nach beendeter Reaktion Wasser und anschliessend 2N Salzsäure zugeben. Als halogenfreie, organische Lösemittelabfälle entsorgen.
Chemische Eigenschaften
n-Butyllithium is a colorless crystalline solid or clear yellow solution. Due to its high reactivity and extreme solubility, even in its impurities, it is commonly thought to be a viscous liquid.
Verwenden
n-Butyllithium is used as a polymerization initiator in the production of elastomers like polybutadiene and styrene- butadiene- styrene. As a strong base, it is utilized in the synthesis of organic compounds. It undergoes thermal decomposition to prepare 1-butene.
synthetische
Industrially, n-butyllithium is produced by the
reaction of n-butyl chloride with lithium metal dispersion in various hydrocarbon solvents.
Hexane is the most commonly used solvent. Up to one-half of the lithium is replaced with
sodium in order to lower the cost of the butyllithium and increase the reactivity of the dispersion.
The reaction is carried out below the boiling point of the solvent.
The laboratory procedure is essentially the same except that pentane and diethyl ether
are two of the more popular solvents. The preparation runs smoothly in ether at lower
temperatures but the product must either be used immediately or kept refrigerated due to
the rapid cleavage of ether by n-butyllithium.
Flammability and Explosibility
The risk of fire or explosion on exposure of butyllithium solutions to the atmosphere
depends on the identity of the organolithium compound, the nature of the solvent,
the concentration of the solution, and the humidity. t-Butyllithium solutions are the
most pyrophoric and may ignite spontaneously on exposure to air. Dilute solutions
(1.6 M, 15% or less) of n-butyllithium in hydrocarbon solvents, although highly
flammable, have a low degree of pyrophoricity and do not spontaneously ignite.
Under normal laboratory conditions (25 °C, relative humidity of 70% or less),
solutions of -20% concentration will usually not ignite spontaneously on exposure to
air. More concentrated solutions of n-butyllithium (50 to 80%) are most dangerous
and will immediately ignite on exposure to air. Contact with water or moist materials
can lead to fires and explosions, and the butyllithiums also react violently with
oxygen.
Lager
In
particular, butyllithium should be stored and handled in areas free of ignition
sources, and containers of butyllithium should be stored under an inert atmosphere.
Work with butyllithium should be conducted in a fume hood under an inert gas such
as nitrogen or argon. Safety glasses, impermeable gloves, and a fire-retardant
laboratory coat are required.
Inkompatibilit?ten
The butyllithiums are extremely reactive organometallic compounds. Violent
explosions occur on contact with water with ignition of the solvent and of the butane
produced. t-Butyllithium will ignite spontaneously in air. The butyllithiums ignite on
contact with water, carbon dioxide, and halogenated hydrocarbons. The
butyllithiums are incompatible with acids, halogenated hydrocarbons, alcohols, and
many other classes of organic compounds.
Waste disposal
Excess butyllithium solution can be destroyed by dilution with hydrocarbon solvent to a concentration of
approximately 5 wt %, followed by gradual addition to water with vigorous stirring under an inert
atmosphere. Alternatively, the butyllithium solution can be slowly poured (transfer by cannula for s- or tbutyllithium)
into a plastic tub or other container of powdered dry ice.
The residues from the above procedures and excess butyllithium should be placed in an appropriate
container, clearly labeled, and handled according to your institution's waste disposal guidelines.
Butyllithium Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
4-CHLORO-2-METHYLPHENYLBORONIC ACID
Benzofuran-2-boronic acid
2-Bromo-5-iodopyridine
TRIS(PENTAFLUOROPHENYL)BORANE
ETHYL 5-CHLOROTHIOPHENE-2-CARBOXYLATE
2-Chloropyridine-5-boronic acid
3-ISOPROPYLPHENYLBORONIC ACID
4-Carboxylphenylboronic acid pinacol ester
2,5-Dichlorophenylboronic acid
5-BROMOPYRIDINE-2-CARBONYL CHLORIDE
5-Chloropyridine-2-boronic acid
Isoquinoline-4-carbaldehyde
3,4,5-TRICHLOROTHIOPHENE-2-CARBONYL CHLORIDE
2,3,6-TRIFLUOROBENZOIC ACID
2-Bromopyridine-5-boronic acid
2,4,6-Trifluorobenzoic acid
1,3-Thiazole-2-carbaldehyde
2-Cyanophenylboronic acid
4-METHYLDIBENZOTHIOPHENE
DIMETHYL(3-PHENOXY-2-OXOPROPYL)PHOSPHONATE
(4-METHOXYPHENYL)-BORANE
4,5-DIBROMOTHIOPHENE-2-CARBOXALDEHYDE
Ethyl 1-methyl-1H-pyrazole-5-carboxylate
1-BENZOTHIOPHENE-2-SULFONYL CHLORIDE
4-Hydroxyphenylboronic acid
METHYL 3-BROMOTHIOPHENE-2-CARBOXYLATE
GRANISETRON-D3
2,4,6-Trichlorobenzoic acid
2-BROMOPYRIDIN-3-YLBORONIC ACID
5-Bromopyridine-3-boronic acid
3-BROMO-1-BENZOFURAN
2,4-Dibromothiophene
2,3,4-Tribromthiophen
5-Methoxypyridine-3-boronic acid
2,3-Difluorophenylboronic acid
1-Methyl-1H-pyrazole-5-carboxylic acid
1-Naphthylboronic acid
2,4'-Dichlor-α(pyrimidin-5-yl)benzhydrylalkohol
5-Methyl-2-pyridineboronic acid
4-N-BUTYLTOLUENE