(tert-Butyl)methylether Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
PHYSIKALISCHE GEFAHREN
Die D?mpfe sind schwerer als Luft und k?nnen sich am Boden ausbreiten. Fernzündung m?glich.
CHEMISCHE GEFAHREN
Reagiert sehr heftig mit starken Oxidationsmitteln unter Feuergefahr. Zersetzung bei Kontakt mit S?uren.
ARBEITSPLATZGRENZWERTE
TLV: 50 ppm (als TWA); Krebskategorie A3 (best?tigte krebserzeugende Wirkung beim Tier mit unbekannter Bedeutung für den Menschen); (ACGIH 2005).
MAK: 50 ppm, 180 mg/m? Spitzenbegrenzung: überschreitungsfaktor (I)1.5; Krebserzeugend Kategorie 3B; Schwangerschaft: Gruppe C; (DFG 2005).
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C kann schnell eine gesundheitssch?dliche Kontamination der Luft eintreten.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt die Haut Verschlucken kann zur Aufnahme in der Lunge führen; Gefahr der Aspirationspneumonie. Exposition weit oberhalb der Arbeitsplatzgrenzwerte kann Bewusstseinstrübung verursachen.
LECKAGE
Zündquellen entfernen. Ausgelaufene Flüssigkeit m?glichst in abdichtbaren Beh?ltern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. NICHT in die Kanalisation spülen. Pers?nliche Schutzausrüstung: Atemschutzfilter für organische Gase und D?mpfe.
R-S?tze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R40:Verdacht auf krebserzeugende Wirkung.
R38:Reizt die Haut.
R11:Leichtentzündlich.
R39/23/24/25:Giftig: ernste Gefahr irreversiblen Schadens durch Einatmen, Berührung mit der Haut und durch Verschlucken.
R23/24/25:Giftig beim Einatmen, Verschlucken und Berührung mit der Haut.
S-S?tze Betriebsanweisung:
S9:Beh?lter an einem gut gelüfteten Ort aufbewahren.
S16:Von Zündquellen fernhalten - Nicht rauchen.
S24:Berührung mit der Haut vermeiden.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
Aussehen Eigenschaften
C5H12O; Methyl-tert.-butylether; farblose Flüssigkeit mit charakteristischem Geruch.
Gefahren für Mensch und Umwelt
Tert.-Butylmethylether ist leichtentzündlich und bildet mit Luft explosionsfähige Gemische. Die Dämpfe sind schwerer als Luft. Mit starken Säuren heftige Reaktionen.
Nach längerer Exposition kann es zu Schläfrigkeit, Schwindel, Erregung, Krämpfen und unter Umständen zu narkosierenden Zuständen kommen. Hautresorption und Hautreizungen möglich. Nach Verschlucken Übelkeit und Erbrechen.
Schwach wassergefährdender Stoff.
Schutzma?nahmen und Verhaltensregeln
Schutzhandschuhe aus Neopren (nur als kurzzeitiger Spritzschutz).
Verhalten im Gefahrfall
Mit flüssigkeitsbindendem Material (z.B. Rench Rapid) aufnehmen. Als Sondermüll entsorgen.
Kohlendioxid, Schaum, Pulver.
Erste Hilfe
Nach Hautkontakt: Mit viel Wasser und Seife abwaschen.
Nach Augenkontakt: Bei geöffnetem Lidspalt mit viel Wasser mindestens 10 Minuten spülen. Augenarzt konsultieren.
Nach Einatmen: Frischluft. Atmung überwachen; ggf. Atemspende oder Gerätebeatmung.
Nach Verschlucken: Erbrechen vermeiden - Aspirationsgefahr! Sofort Arzt konsultieren. Aktivkohle (20 - 40 g in 10%iger Aufschlämmung).
Nach Kleidungskontakt: Kontaminierte Kleidung sofort ausziehen.
Ersthelfer: siehe gesonderten Anschlag
Sachgerechte Entsorgung
Als Sondermüll entsorgen (Sammelbehälter für halogenfreie Lösungsmittel).
Chemische Eigenschaften
tert-Butyl methyl ether, also known as MTBE or Methyl tert-butyl ether, is a clear, colorless liquid with a low viscosity that is combustible and has a distinct, turpentine-like odor. It is miscible with organic solvents, but only slightly soluble in water. Methyl tert-butyl ether is very stable under alkaline, neutral, and weakly acidic conditions. In the presence of strong acids, it is cleaved to methanol and isobutene. Depending on reaction conditions the latter can form isobutene oligomers. MTBE does not undergo autoxidation and, in contrast to other ethers, it does not form peroxides with atmospheric oxygen. It improves the antiknock properties when added to motor gasoline.
History
tert-Butyl methyl ether was first synthesized (by the classical Williamson ether synthesis) and characterized in 1904. Extensive studies in the United States during World War II demonstrated the outstanding qualities of MTBE as a high-octane fuel component. It was first commercially produced in Italy in 1973 for use as an octane enhancer in gasoline. U.S. production of MTBE started in 1979 after Atlantic Richfield Co. (ARCO) was granted a waiver by the U.S. Environmental Protection Agency (EPA) that allowed MTBE to be blended up to 7 vol % in U.S. unleaded gasoline. The use of other aliphatic ethers was allowed when the U.S. EPA issued its “substantially similar” definition for unleaded gasoline specifications in 1981. Under this definition, any aliphatic ether or ether mixture could be blended in unleaded gasoline as long as the total oxygen contribution from the ethers does not exceed 2.0% oxygen by weight in the gasoline. This allowed MTBE to be blended up to approximately 11 vol % in gasoline.
Verwenden
Methyl tert-butyl ether (MTBE) was primarily used as a gasoline additive in unleaded gasoline in the United States prior to 2005, in the manufacture of isobutene, and as a chromatographic eluent especially in high pressure liquid chromatography. It is also a pharmaceutical agent and can be injected into the gallbladder to dissolve gallstones (ATSDR, 1996). tert-Butyl methyl ether is also used in the petrochemical industry. By reversal of its formation reaction, MTBE can be cracked to isobutene and methanol on acidic catalysts at higher temperature than MTBE synthesis.
synthetische
tert-butyl methyl ether can be prepared by the reaction of potassium tert-butoxide and bromomethane. Methyl tert-butyl ether also can be obtained by the acid-catalyzed addition of methanol to isobutene. Suitable catalysts are solid acids such as bentonites, zeolites and – commonly used in industrial world scale MTBE-production units – macroporous acidic ion-exchange resins. The reaction is weakly exothermic with a heat of reaction of -37.7 kJ/mol.
Definition
ChEBI: Methyl tert-butyl ether is an ether having methyl and tert-butyl as the two alkyl components. It has a role as a non-polar solvent, a fuel additive and a metabolite.
Allgemeine Beschreibung
Methyl tert-butyl ether appears as a colorless liquid with a distinctive anesthetic-like odor. Vapors are heavier than air and narcotic (cause drowsiness when inhaled). This liquid has a flash point lower than most ambient temperatures, so it will readily ignite under most conditions. It is less dense than water and moderately soluble in water. Used as a octane booster in gasoline.
Air & Water Reaktionen
Highly flammable. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979. p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously [MCA Case History 616. 1960].
Reaktivit?t anzeigen
Tert-Butyl methyl ether is a kind of Ethers, it form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Hazard
Tert-Butyl methyl ether is slightly toxic by ingestion and inhalation. Flammable when exposed to heat or flame. Upper respiratory tract irritant and kidney damage. Questionable carcinogen.
Health Hazard
INHALATION: May cause dizziness or suffocation. Contact may irritate or burn eyes or skin. May be harmful if swallowed.
Industrielle Verwendung
Methyl tert-butyl ether (MTBE) is used as an octane enhancer in gasoline. EPA
regulations allow up to 2.7 wt.% oxygen in gasoline which allows 15 vol.%
MTBE in gasoline. Other alkyl ethers can also be blended into gasoline up to the
2.7 wt% oxygen requirement. The stability of MTBE to oxidation and peroxide
formation gives this unsymmetrical ether an advantage over other ethers in various
extraction and reaction solvent applications.
Sicherheitsprofil
Poison by intravenous
route. Slightly toxic by ingestion and
inhalation. Flammable when exposed to heat
or flame. When heated to decomposition it
emits acrid smoke and irritating fumes. See
also ETHERS.
m?gliche Exposition
Tert-Butyl methyl ether is used as an organic solvent; as an
octane booster in unleaded gasolines; in making other chemicals; and in medicine to dissolve gall stones
Carcinogenicity
EPA has not classified methyl tert-butyl ether with respect to potential carcinogenicity. There is evidence for the carcinogenicity of MTBE in animals. MTBE causes leukemias/lymphomas in female rats, renal tubular tumors and Leydig cell tumors in male rats, and hepatocellular tumors in mice. Positive animal carcinogenicity data and some further concordance in tumor sites for formaldehyde and TBA, metabolites of MTBE, provide support for this conclusion. However, uncertainties remain about the nature and extent of risk at very low doses, and about the particular tumor sites that are most relevant to humans.
Environmental Fate
tert-Butyl Methyl Ether can be released during manufacturing or blending with gasoline; during the storage, distribution, and transfer of MTBE-blended gasoline; and from spills or leaks or fugitive emissions at automotive service stations (U.S. EPA, 1994a). Vapor emissions from MTBE-blended gasoline may also contribute to atmospheric levels (U.S. EPA, 1988). It is not expected to persist in the atmosphere because it undergoes destruction from reactions with hydroxyl radicals. A total atmospheric lifetime for MTBE of approximately 3 and 6.1 days has been reported in polluted urban air and in nonpolluted rural air, respectively (U.S. EPA, 1993a). Based upon its vapor pressure and Henry s law constant, MTBE is highly volatile and would be expected to evaporate rapidly from soil surfaces or water. It may be fairly persistent when introduced into subsurface soils or to groundwater since volatilization to the atmosphere is reduced or eliminated. It does not readily degrade in surface waters due to hydrolysis or other abiotic processes. It is also resistant to biodegradation (U.S. EPA, 1993a). It is usually removed from surface waters very rapidly because of its high volatility. If released as part of a gasoline mixture from leaking underground storage tanks, its relatively high water solubility combined with little tendency to sorb to soil particles encourages migration to local groundwater supplies (U.S. EPA, 1993a).
Versand/Shipping
UN2398 Methyl tert-butyl ether, Hazard Class: 3;
Labels: 3-Flammable liquid.
l?uterung methode
Purify as for n-butyl methyl ether. [Beilstein 1 IV 1615.]
Inkompatibilit?ten
May form explosive mixture with air.
May be able to form unstable peroxides. Much less likely
to form peroxides than other ethers. Incompatible with
strong acids. Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. May accumulate static
electrical charges, and cause ignition of its vapors.
Waste disposal
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be observed.
(tert-Butyl)methylether Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
Methyl-2-amino-3-thenoat
(1R,2R)-(-)-1,2-Diaminocyclohexane
1-(Boc-amino)cyclopropanecarboxylic acid
((1R,4S)-2-Azabicyclo[2.2.1]hept-5-en-3-one
ETHYL 2-(BROMOMETHYL)ACRYLATE
5-METHOXY-1H-PYRROLO[3,2-B]PYRIDINE-2-CARBOXYLIC ACID
2,2,2-Trichlorethylchlorformiat
BIS(4-NITROBENZYL) PHOSPHOROCHLORIDATE
Tris(dibenzylideneacetone)dipalladium-chloroform adduct
3-N-Boc-amino-azetidine
1-(Chlormethyl)-4-vinylbenzol
N,N-Diethyl-3-oxobutyramid
Sodium triacetoxyborohydride
Brinzolamide
5-AMINOINDOLE HYDROCHLORIDE
4-Aminotetrahydropyran hydrochloride
N-Methyl-4-anisidin
3-AMINO-ISONICOTINIC ACID ETHYL ESTER
2-CHLOROMALONALDEHYDE
Azetidin
4-PYRIDIN-2-YLISOXAZOL-5-AMINE
2-(2-NITROPHENYL)ACRYLALDEHYDE
(3-AMINO-PYRIDIN-4-YL)-METHANOL
Tetraheptylammoniumbromid
Tetrakis(triphenylphosphin)palladium
5-METHOXY-1H-PYRROLO[2,3-C]PYRIDINE-2-CARBALDEHYDE
1-Aminocyclopropanecarboxylic acid
5-METHOXY-1H-PYRROLO[2,3-C]PYRIDINE-2-CARBOXYLIC ACID
Trichlor(octadecyl)silan
6-Nitro-1H-indol
N5-[Imino(phosphonoamino)methyl]L-ornithin
tert-Butylmethylmalonat
1,1,1,5,5,5-Hexafluorpentan-2,4-dion
6-Aminoindole
Azetidine hydrochloride
3-METHOXYBENZYL BROMIDE
4,6-Dimethylpyrimidine-5-carboxylic acid
2-Methoxy-ethylacetat
3-AMINO-PYRIDINE-4-CARBALDEHYDE
PHOSPHO-L-ARGININE SODIUM
