Polyvinyl chloride Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
WEISSES PULVER ODER K?RNCHEN.
PHYSIKALISCHE GEFAHREN
Staubexplosion der pulverisierten oder granulierten Substanz in Gemischen mit Luft m?glich.
CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen unter Bildung giftiger Rauche mit Chlorwasserstoff und Phosgen. Reagiert sehr heftig mit Fluor.
ARBEITSPLATZGRENZWERTE
TLV nicht festgelegt (ACGIH 2005).
MAK: (als Staub) 1.5 mg/m?(Alveoleng?ngige Fraktion); (DFG 2005).
INHALATIONSGEFAHREN
Eine gesundheitssch?dliche Partikelkonzentration in der Luft kann beim Dispergieren schnell erreicht werden, vor allem als Pulver.
WIRKUNGEN NACH WIEDERHOLTER ODER LANGZEITEXPOSITION
Risiko der Lungensch?digung bei wiederholter oder l?ngerer Exposition gegenüber Staubpartikeln. mit nachfolgenden Fibrose (Pneumokoniose).
LECKAGE
Pers?nliche Schutzausrüstung: Atemschutzger?t, P1-Filter für inerte Partikel. Verschüttetes Material in Beh?ltern sammeln.
R-S?tze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
Beschreibung
Polyvinyl chloride, commonly abbreviated PVC, is the thirdmost widely produced plastic, after polyethylene and polypropylene. PVC is used in construction because it is more effective than traditional materials such as copper, iron or wood in pipe and profile applications. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is also used in clothing and upholstery, electrical cable insulation, inflatable products and many applications in which it replaces rubber.
Pure polyvinyl chloride is a white, brittle solid. It is insoluble in alcohol, but slightly soluble in tetrahydrofuran.
Chemische Eigenschaften
Peroxide- or thiadiazole-cured CPE exhibits good thermal
stability up to 150°C and is much more oil resistant than
nonpolar elastomers such as natural rubber or EPDFM.
Commercial products are soft when the chlorine content is
28–38%. At more than 45% chlorine content, the material
resembles polyvinyl chloride. Higher-molecular-weight
polyethylene yields a chlorinated polyethylene that has
both high viscosity and tensile strength.
Physikalische Eigenschaften
PVC is a thermoplastic polymer. Its properties for PVC are usually categorized based on rigid and flexible PVCs.
Mechanical propertiesPVC has high hardness and mechanical properties. The mechanical properties enhance with the molecular weight increasing, but decrease with the temperature increasing. The mechanical properties of rigid PVC (uPVC) is very good, the elastic modulus can reach to 1500-3,000 MPa. The soft PVC (Flexible PVC) elastic is 1.5- 15 MPa. However, elongation at break is up to 200% -450%. PVC friction is ordinary, the static friction factor is 0.4-0.5, the dynamic friction factor is 0.23.
Thermal propertiesThe heat stability of PVC is very poor, when the temperature reaches 140 °C PVC starts to decompose. Its melting temperature is 160 °C. The linear expansion coefficient of the PVC is small and has flame retardancy, the oxidation index is up to 45 or more. Therefore, the addition of a heat stabilizer during the process is necessary in order to ensure the product's properties.
Electrical propertiesPVC is a polymer with good insulation properties but because of its higher polar nature the electrical insulating property is inferior to non polar polymers such as poly ethylene and poly propylene.
Verwenden
Polyvinyl Chloride could be useful for the removal epoxidation catalyst from epoxidized unsaturated oils.
Vorbereitung Methode
In chlorinating polyethylene, chlorine atoms substitute for
hydrogen atoms of the polyethylene chain in both crystalline
and amorphous regions. The most common chlorination
method is treating polyethylene powder in an aqueous
suspension that contains hydrochloric acid and a free-radical
initiator with chlorine gas. After the desired level of
chlorination is obtained, the CPE is water washed and dried,
and an antiblocking agent is then added.
Definition
ChEBI: A polymer composed of repeating chloroethyl units.
Allgemeine Beschreibung
Poly(vinyl chloride) [PVC] is a polymer which is mostly prepared from vinyl chloride monomer. In most cases PVC is mixed with heat stabilizers, lubricants, plasticizers, fillers, and other additives.
Hazard
Decomposes at 148C, evolving toxic fumes
of hydrogen chloride. Pneumoconiosis, lower respi-
ratory tract irritant, and pulmonary function effects.
Questionable carcinogen.
Industrielle Verwendung
Among the vinyl polymers and copolymers, the polyvinyl chloride (PVC) thermoplastics are the most commercially significant. With various plasticizers, fillers, stabilizers, lubricants, and impact modifiers, PVC is compounded to be flexible or rigid, opaque or transparent, to have high or low modulus, or to have any of a wide spectrum of properties or processing characteristics.
PVC resin can also be chlorinated (CPVC) and it can be alloyed with other polymers such as ABS (acrylonitrile butadiene styrene), acrylic, polyurethane, and nitrile rubber to improve impact resistance, tear strength, resilience, heat-deflection temperature, or processibility.
PVC is a hard, flame-resistant, and chemicalresistant thermoplastic resin. The resin is available in the powder form, as a latex, or in the form of plastisol. PVC resin, pigments, and stabilizers are milled into plasticizers to form a viscous coating material (plastisol) that polymerizes into a tough elastic film when heated. Plastisols are used extensively for coating glass bottles and glass fabrics. The dispersion types of resins are used in flexible molding compounds. Such formulations consist of a vinyl paste resin, a suitable plasticizer such as dioctyl phthalate, and a stabilizer (usually a compound of lead). Flexible molds are widely applied to plaster casting and encapsulation of electronic circuits with epoxy resins.
Sicherheitsprofil
Chronic inhalation of
dusts can cause pulmonary damage, blood
effects, abnormal liver function. “Meat
wrapper’s asthma” has resulted from the
cutting of PVC films with a hot knife. Can
cause allergic dermatitis. Questionable
carcinogen with experimental tumorigenic
data. Reacts violently with F2. When heated
to decomposition it emits toxic fumes of
Cland phosgene.
Polyvinyl chloride Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
