| Identification | More | [Name]
Hexachloro-1,3-butadiene | [CAS]
87-68-3 | [Synonyms]
1，1，2，3，4，4-Hexachloro-1，3-butadiene
HEXACHLOR-1,3 BUTADIENE
HEXACHLORO-1,3-BUTADIENE
HEXACHLOROBUTADIENE
PERCHLORBUTADIENE
PERCHLORO-1,3-BUTADIENE
PERCHLOROBUTADIENE
1,1,2,3,4,4-hexachloro-3-butadiene
1,1,2,3,4,4-Hexachloro-buta-1,3-diene
1,3-Butadiene, hexachloro-
1,3-butadiene,1,1,2,3,4,4-hexachloro-
1,3-Hexachlorobutadiene
3-Butadiene,1,1,2,3,4,4-hexachloro-1
Butadiene, hexachloro-
butadiene,hexachloro-
C 46
c46
Dolen-pur
Gp-40-66:120
HCBD | [EINECS(EC#)]
201-765-5 | [Molecular Formula]
C4Cl6 | [MDL Number]
MFCD00000836 | [Molecular Weight]
260.76 | [MOL File]
87-68-3.mol |
| Chemical Properties | Back Directory | [Appearance]
Hexachlorobutadiene is a clear, colorless
liquid with a faint, turpentine-like odor. | [Melting point ]
-19 °C | [Boiling point ]
210-220 °C(lit.)
| [density ]
1.68 | [vapor pressure ]
0.2 mm Hg ( 20 °C)
| [refractive index ]
n20/D 1.555(lit.)
| [Fp ]
210-220°C | [storage temp. ]
+4°C
| [solubility ]
Soluble in ethanol and ether (U.S. EPA, 1985) | [form ]
neat | [Odor]
faint turpentine odor | [Stability:]
Stable. Incompatible with rubber, oxidizing agents. | [Water Solubility ]
(mg/L):
4.78 at 25 °C (shake flask-LSC, Banerjee et al., 1980)
4 at 20–25 °C (Geyer et al., 1980) | [Merck ]
14,4678 | [BRN ]
1766570 | [Henry's Law Constant]
3.55, 5.87, 6.90, 10.5, and 15.3 at 2.0, 6.0, 10.0, 18.0, and 25.0 °C, respectively (EPICS-SPME,
Dewulf et al., 1999) | [Dielectric constant]
2.6（Ambient） | [Exposure limits]
Potential occupational carcinogen. NIOSH REL: TWA 20 ppb (240 mg/m3);
ACGIH TLV: TWA 0.02 ppm (adopted). | [CAS DataBase Reference]
87-68-3(CAS DataBase Reference) | [IARC]
3 (Vol. 73) 1999 | [EPA Substance Registry System]
Hexachlorobutadiene (87-68-3) |
| Safety Data | Back Directory | [Hazard Codes ]
T,N,F | [Risk Statements ]
R24/25:Toxic in contact with skin and if swallowed .
R34:Causes burns.
R40:Limited evidence of a carcinogenic effect.
R50/53:Very Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment .
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R11:Highly Flammable. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S60:This material and/or its container must be disposed of as hazardous waste .
S36/37:Wear suitable protective clothing and gloves .
S16:Keep away from sources of ignition-No smoking .
S7:Keep container tightly closed . | [RIDADR ]
UN 2279 6.1/PG 3 | [WGK Germany ]
3 | [RTECS ]
EJ0700000 | [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
III | [HS Code ]
29032990 | [Hazardous Substances Data]
87-68-3(Hazardous Substances Data) | [Toxicity]
LD50 in male, female mice, rats (mg/kg): 105, 76, 216, 175 i.p.; 80, 65, 250, 270 orally (Gradiski) |
| Hazard Information | Back Directory | [General Description]
A colorless liquid with a mild odor. Insoluble in water and denser than water. Nonflammable. May be toxic by ingestion or inhalation. Used as a solvent and heat transfer fluid. | [Reactivity Profile]
HEXACHLOROBUTADIENE(87-68-3) rapidly decomposes rubber on contact. Can react vigorously with oxidizing materials. Reacts to form an explosive product with bromine perchlorate. . Gives highly toxic and irritating chloride fumes when burned. | [Air & Water Reactions]
Insoluble in water. | [Hazard]
Toxic by ingestion and inhalation, a questionable carcinogen. | [Health Hazard]
Poisonous; may be fatal if inhaled, swallowed or absorbed through the skin. Inhalation causes repiratory difficulty and irritation of mucous membranes. Skin and eye irritant; may cause burns. | [Potential Exposure]
Hexachlorobutadiene is used as a sol vent; heat-transfer fluid; transformer fluid; hydraulic fluid;
as a solvent for elastomers; as a wash liquor for removing
higher hydrocarbons. | [First aid]
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Seek medical attention immediately.
If this chemical has been inhaled, remove from exposure,
begin rescue breathing (using universal precautions, includ ing resuscitation mask) if breathing has stopped and CPR if
heart action has stopped. Transfer promptly to a medical
facility. When this chemical has been swallowed, get medi cal attention. Give large quantities of water and induce
vomiting. Do not make an unconscious person vomit. | [Shipping]
UN2279 Hexachlorobutadiene, Hazard Class:
6.1; Labels: 6.1-Poisonous materials. | [Incompatibilities]
Strong reaction with oxidizers, aluminum
powder. Attacks aluminum; some plastics, rubber and coatings | [Description]
Hexachlorobutadiene was first synthesized in 1877 by chlorination
of hexyl iodide. It is an industrial by-product of
tetrachloroethylene, trichloroethylene, and perchloroethylene
production. | [Chemical Properties]
colourless liquid (typical odour recognition threshold: | [Chemical Properties]
Hexachlorobutadiene is a clear, colorless
liquid with a faint, turpentine-like odor. | [Waste Disposal]
High temperature incineration
with flue gas scrubbing. Consult with environmental
regulatory agencies for guidance on acceptable disposal
practices. Generators of waste containing this contaminant (≥100 kg/mo) must conform to EPA regulations governing
storage, transportation, treatment, and waste disposal. | [Physical properties]
Clear, yellowish-green liquid with a mild to pungent, turpentine-like odor. Odor threshold
concentration is 6 ppb (quoted, Keith and Walters, 1992). | [Uses]
Hexachloro-1,3-butadiene is used as an urinary biomarker as a tool for early screening of potential kidney toxicity. Hexachloro-1,3-butadiene (HCBD) causes kidney injury. | [Uses]
Intermediate in the manufacture of rubber Compounds, chlorofluorocarbons, and lubricants. Hydraulic fluid, fluid for gyroscopes, heat transfer fluid, solvent, laboratory reagent. Soil fumigant for vineyards. | [Uses]
Produced as an unwanted by-product
during the production of tetrachloroethylene,
trichloroethylene, carbon tetrachloride, and
chlorine; formerly used as a pesticide in other
countries | [Definition]
ChEBI: Hexachloro-1,3-butadiene is an organochlorine compound. | [Carcinogenicity]
In rats given oral administration, it produced
benign and malignant tumors in the kidneys in both
sexes. The IARC then concluded that there is limited evidence
that HCBD is carcinogenic in rats.
Nakagawa et al. reported that HCBD is a potent nephrotoxicant
that selectively damaged the straight portion (pars
recta) of the proximal tubule in the rat. They also
reported administering 0.1% HCBD for 30 weeks to male
Wistar rats previously given 0.1% N-ethyl-N-hydroxyethylnitrosamine
(EHEN) in their drinking water for 2 weeks and
that the combined treatment resulted in a significantly higher
incidence of renal cell tumors than when EHEN was administered
alone. | [Source]
Hydraulic fluids and rubber (quoted, Verschueren, 1983). An impurity in aldrin. | [Environmental Fate]
Chemical/Physical. Hexachlorobutadiene will not hydrolyze to any reasonable extent (Kollig,
1993).
At influent concentrations of 1.0, 0.1, 0.01, and 0.001 mg/L, the GAC adsorption capacities
were 258, 91, 21, and 11 mg/g, respectively (Dobbs and Cohen, 1980). | [Metabolic pathway]
In the presence of glutathione (GSH), mouse liver
microsomes and cytosol transform 14C-hexachloro-
1,3-butadiene (HCBD) to S-
(pentachlorobutadienyl)glutathione (PCBG). PCBG
formation in subcellular fractions from a mouse kidney
is very limited. After an oral dose of HCBD to mice,
PCBG in feces, and S-(pentachlorobutadienyl)-L-
cysteine, N-acetyl-S-(pentachlorobutadienyl)-L-
cysteine, and 1,1,2,3-tetrachlorobutenoic acid in the
urine are identified as the metabolites. | [storage]
Color Code- Blue: Health Hazard/Poison: Storein a secure poison location. Prior to working with thischemical you should be trained on its proper handling andstorage. Store in tightly closed containers in a cool, well-venti lated area away from oxidizers. Where possible, auto-matically pump liquid from drums or other storage contain-ers to process containers A regulated, marked area shouldbe established w here hex achlorobutadiene is handled, used,or stored. A regulated, marked area should be establi shedwhere this chemical is handled, used, or stored in compli-ance with OSHA Standard 1910. 1045. | [Purification Methods]
Wash the diene with four or five 1/10th volumes of MeOH (or until the yellow colour has been extracted), then stir it for 2hours with H2SO4, wash it with distilled water until neutral and filter it through a column of P2O5. Distil it under reduced pressure through a packed column. [Rytner & Bauer J Am Chem Soc 82 298 1960, Beilstein 1 IV 998.] | [Toxicity evaluation]
Hexachlorobutadiene specifically damages the pars recta portion
of the proximal tubule with loss of the brush border. The
mechanism involves nonoxidative formation of the glutathione
conjugate in liver with subsequent transport to the kidney for
mercapturic acid conjugate excretion. The resulting cysteine
conjugates are substrates for cysteine-conjugate b-lyase, which
removes ammonia and pyruvate from the cysteine conjugate to
produce thionylacyl halides and thioketenes. These toxic thiol
compounds can then bind covalently to proteins and DNA in
proximal tubular cells to produce nephrotoxicity. S-(1,2,3,4,4-
Pentachloro-1,3-butadienyl)-L-cysteine has been identified as the
ultimate metabolite responsible for hexachlorobutadieneinduced
nephrotoxicity. Mitochondrial dysfunction is reported
to be the ultimate subcellular toxic lesion. Enterohepatic
recirculation of hexachlorobutadiene–glutathione conjugates is
believed to play a major role in this mechanism, since cannulation
of the bile duct of rats prevents nephrotoxicity. |
| Questions And Answer | Back Directory | [Overview]
Hexachloro-1,3-butadiene is a colorless, oily liquid with a mild turpentine-like odor. The compound poorly dissolves in water (4mg/kg at 20°C), but miscible with ether and ethanol[1]. Hexachloro-1,3-butadiene is found predominantly as a by-product from the manufacture of chlorinated solvents and related products and is also used in some industrial processes, such as heat transfer liquid, reactant in chemical syntheses, organic solvent, wash liquor for hydrocarbon removal[2][3]. Hexachloro-1,3-butadiene is very stable to acids and bases, and it has no tendency to polymerize even under high pressure (e.g., 10 MPa). Hexachloro-1,3-butadiene can react with chlorine under harsh conditions (e.g., under pressure in an autoclave at 230-250 °C ), and then generally with cleavage of the carbon skeleton and formation of hexachloroethane and perchloroethylene[4].
| [History and Occurrence]
Hexachloro-1,3-butadiene does not exist in nature. The compound can result as a by-product from processing other chemicals. According to reports to the UN Environmental Programme, hexachloro-1,3-butadiene does not appear to be intentionally manufactured in Europe, Japan, Canada, or the United States. Intentional production in Europe ceased as early as the late 1970s. Then, production of hexachloro-1,3-butadiene has been restricted or banned in subsequent years in various other parts of the world. However, the chemical continues to be manufactured as a byproduct of chemical manufacturing[5][6][7].
| [Formation]
Hexachloro-1,3-butadiene can be directly synthesized through the chlorination of butadiene or butane or produced as a by-product of chlorinated hydrocarbon manufacturing, including perchloroethylene, trichloroethylene, and carbon tetrachloride [8]. It appears that hexachloro-1,3-butadiene, generated as a by-product during the synthesis of other compounds of interest, may be recovered or recycled for commercial purposes.
| [Application]
It is a chlorinated aliphatic diene with several applications and commonly used as a solvent for other chlorine-containing compounds. Applications of hexachlorobutadiene in industries are extensive, used as a solvent for rubber and other polymers, in heat transfer fluids, as a transformer liquid, as a hydraulic fluid, as a solvent and to make lubricants, and as a washing liquor for removing hydrocarbons from gas streams. The uses also include as a seed dressing and fungicide and in manufacturing processes such as production of aluminium and graphite rods. Thus, the major source of hexachlorobutadiene has been reported because of inadvertent production as a waste byproduct of the manufacture of certain chlorinated hydrocarbons such as tetrachloroethylene, trichloroethylene, and carbon tetrachloride.[9]
| [Processing]
Hexachloro-1,3-butadiene is primarily generated as a by-product of the manufacture of chlorinated hydrocarbons, particularly perchloroethylene, trichloroethylene, and carbon tetrachloride, but it can also be produced during magnesium manufacturing via electrolysis. According to reports to the UN Environmental Programme, hexachloro-1,3-butadiene does not appear to be intentionally manufactured in Europe, Japan, Canada, or the United States. Intentional production in Europe ceased as early as the late 1970s; in various other parts of the world, production of hexachloro-1,3-butadiene has been restricted or banned in subsequent years; however, the chemical continues to be manufactured as a byproduct of chemical manufacturing[3].
Hexachloro-1,3-butadiene may be processed for use as:
- Plastic additives[10]
- Protective coatings[11]
- Prepared in solvent as analytical standards[12]
- Part of the recovery system for chlorine containing gases at chlorine plants[13]
- Chemical intermediates in the production of rubber, chlorofluorocarbons, and lubricants[14]
| [Future trends]
Hexachloro-1,3-butadiene is toxic. Investigations have shown that its effects in animals are mainly restricted to the kidneys, including carcinogenicity. The effects on human populations, at low levels of exposure via inhalation, are unknown. The American National Occupational Safety and Health Administration (NIOSHA) recommends that exposure to HCBD should not exceed 20 ppb for a eight hour workday within a 40 hour working week[15].
Hexachloro-1,3-butadiene, a man-made chlorohydrocarbon, has been listed as a candidate persistent organic pollutant (POP) by the Stockholm Convention in 2011 for its persistence, toxicity, bioaccumulation, and potential long-range transport abilities[16].
| [References]
- Andre Lecloux, Eurochlor, Hexachlorobutadiene-Sources, environmental fate and risk characterisation (2004).
- Jean Rabovsky, Evidence of the carcinogenicity of 1,3-HEXACHLOROBUTADIENE (2000).
- Office of Chemical Safety and Pollution Prevention U.S. EPA, Preliminary Information on Manufacturing, Processing, Distribution, Use, and Disposal: Hexachlorobutadiene (2017).
- Rossberg, Manfred, et al. "Chlorinated hydrocarbons." Ullmann's encyclopedia of industrial chemistry (2006).
- https://www.dhss.delaware.gov/dph/files/hexachlbtfaq.pdf
- US Environmental Protection Agency, Health Effects Support Document for Hexachlorobutadiene, (Washington DC: Office of Water-Health and Ecological Criteria Division, 2003).
- United Nations Environmental Programme, Persistent Organic Pollutants Review Committee, Risk Management Evaluation on Hexachlorobutadiene (Rome: Persistent Organic Pollutants Review Committee, 2013).
- Yang, Raymond SH. "Hexachloro-1, 3-butadiene: toxicology, metabolism, and mechanisms of toxicity." Reviews of environmental contamination and toxicology. Springer, New York, NY, 1988. 121-137.
- Hexachlorobutadiene, Larc Monographs, 7, 277-294.
- Chemstock, Hexachloro‐1,3‐Butadiene (Hackettstown, New Jersey: Chemstock, 2017).
- State of Washington – Department of Ecology, Children’s Safe Product Act Reported Data (Lacey, Washington: State of Washington, 2017).
- https://www.sigmaaldrich.com/catalog/product/sial/45525?lang=en®ion=US
- United Nations Environmental Programme, Persistent Organic Pollutants Review Committee, Risk Management Evaluation on Hexachlorobutadiene (Rome: Persistent Organic Pollutants Review Committee, 2013).
- US Environmental Protection Agency, Health Effects Support Document for Hexachlorobutadiene, (Washington DC: Office of Water – Health and Ecological Criteria Division, 2003).
- Staples, B., et al. "Land contamination and urinary abnormalities: cause for concern?." Occupational and environmental medicine 60.7 (2003): 463-467.
- Zhang, Haiyan, et al. "Levels and distributions of hexachlorobutadiene and three chlorobenzenes in biosolids from wastewater treatment plants and in soils within and surrounding a chemical plant in China." Environmental science & technology 48.3 (2014): 1525-1531.
|
|
|