成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

ChemicalBook > Product Catalog >Chemical Reagents >Organic reagents >Thiolate >Perchloromethylmercaptan

Perchloromethylmercaptan

Perchloromethylmercaptan Basic information
Product Name:Perchloromethylmercaptan
Synonyms:(Trichloromethyl)sulfenyl chloride;carbonsulfoperchloride;Clairsit;Mercaptan methylique perchlore;mercaptanmethyliqueperchlore;trichloromethanesulfurylchloride;Trichloromethanesulphenyl chloride;trichloromethanesulphenylchloride
CAS:594-42-3
MF:CCl4S
MW:185.89
EINECS:209-840-4
Product Categories:
Mol File:594-42-3.mol
Perchloromethylmercaptan Structure
Perchloromethylmercaptan Chemical Properties
Boiling point 146-148 °C(lit.)
density 1.7 g/mL at 25 °C(lit.)
vapor density 6.41 (vs air)
vapor pressure 2.02 psi ( 20 °C)
refractive index n20/D 1.537(lit.)
storage temp. -20°C Freezer
solubility Chloroform, Ethyl Acetate
form Liquid
color Clear yellow
CAS DataBase Reference594-42-3(CAS DataBase Reference)
NIST Chemistry ReferenceMethanesulfenyl chloride, trichloro-(594-42-3)
EPA Substance Registry SystemPerchloromethyl mercaptan (594-42-3)
Safety Information
Hazard Codes T,T+,N
Risk Statements 23/24/25-34-26-25-21-52/53
Safety Statements 26-36/37/39-45-7/9-28A-25-61
RIDADR UN 1670 6.1/PG 1
OEBC
OELTWA: 0.1 ppm (0.8 mg/m3)
WGK Germany 3
RTECS PB0370000
13-21
HazardClass 6.1(a)
PackingGroup I
HS Code 29309099
Hazardous Substances Data594-42-3(Hazardous Substances Data)
IDLA10 ppm
MSDS Information
ProviderLanguage
Perchloromethylmercaptan English
SigmaAldrich English
Perchloromethylmercaptan Usage And Synthesis
Chemical PropertiesPerchloromethyl mercaptan is a pale yellow oily liquid with a foul-smelling, unbearable, acrid odor
Chemical PropertiesCLEAR YELLOW LIQUID
UsesOrganic synthesis, dye intermediate, fumigant.
UsesPerchloromethyl Mercaptan is used as a reactant in the preparation of thio- and selenoesters of triflic acid via a route to thio- and selenosulfonates from disulfides and diselenides.
UsesProduction of fungicides; vulcanizing accelerator in rubber industry
Synthesis Reference(s)Tetrahedron, 48, p. 8065, 1992 DOI: 10.1016/S0040-4020(01)80477-4
General DescriptionA yellow oily liquid with an offensive odor. Insoluble in water. Density 1.72 g / cm3. Hence sinks in water. Nonflammable but supports combustion. Very toxic by inhalation or skin absorption.
Air & Water ReactionsInsoluble in water. Slowly decomposed by moisture in the air. Reacts with hot water to give carbon dioxide, hydrochloric acid and sulfur.
Reactivity ProfilePerchloromethylmercaptan is incompatible with acids, diazo and azo compounds, halocarbons, isocyanates, aldehydes, alkali metals, nitrides, hydrides, and other strong reducing agents. Reactions with these materials generate heat and in many cases hydrogen gas. Reacts readily with oxidizing agents.
Health HazardMay cause death or permanent injury after short exposure to small quantities, strong irritant to eyes and skin. Inhalation may cause severe irritation of the upper respiratory tract. It also is a strong irritant to the eyes and skin. Brief exposure to lower concentrations may produce central nervous system depression and lung, liver, and heart congestion. Severe exposures may be fatal. Exposure of eyes may lead to severe conjunctivitis or corneal damage. The liquid is irritating to the skin, and may be absorbed through the skin in quantities sufficient to cause general toxic effects. Ingestion may cause damage to mucous membranes and result in pain and burning of the mouth and throat, nausea, vomiting, cramps, and diarrhea. In severe cases, tissue ulceration and CNS depression may occur.
Fire HazardVery irritating vapors formed from hot material; may form phosgene gas, hydrogen chloride, and sulfur dioxide. At high temperatures Perchloromethylmercaptan will decompose to carbon tetrachloride, sulfur chloride, heavy oil polymers, phosgene gas, hydrogen chloride, and sulfur dioxide. Reacts with iron or steel, evolving carbon tetrachloride. Corrosive to most metals. Reacts with water only when hot to give carbon dioxide, hydrochloric acid, and sulfur. Hazardous polymerization may not occur.
Safety ProfilePoison by ingestion, inhalation, and intravenous routes. A severe skin, eye, and mucous membrane irritant. When heated to decomposition it emits very toxic fumes of Cland SOx. See also MERCAPTANS
Potential ExposurePerchloromethyl mercaptan is used as an intermediate for the synthesis of dyes and fungicides, such as Captan and Folpet. This chemical has been considered as a warfare tear gas because of its highly irritant properties.
ShippingUN1670 Perchloromethyl mercaptan, Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Inhalation Hazard Zone B.
IncompatibilitiesWater contact forms HCl, sulfur and carbon dioxide. Reacts with alkalies, amines, hot water; alcohols, oxidizers, reducing agents; iron, and steel. Attacks most metals.
Waste DisposalIncineration together with a flammable solvent in a furnace equipped with afterburner and scrubber.
Tag:Perchloromethylmercaptan(594-42-3) Related Product Information
METHYL MERCAPTAN 1,2-Ethanedithiol Sodium chloride Ferric chloride Sulfuryl chloride Ethanethiol Polyvinyl chloride Potassium chloride Ammonium chloride Choline chloride 1-Dodecanethiol Benzyl mercaptan PYRITHIOXIN DIHYDROCHLORIDE Calcium chloride Sodium thiomethoxide PYRITHIOXIN 2-Ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate Trichloromethanesulfonyl chloride