成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

polymer

Polymer is the product made of the polymerization reaction of monomer. Molecule should have repetitive structural units. Polymer of low molecular weight is called as low polymer (or oligomer) such as trioxymethylene. Polymer of high-molecular weight, up to thousands or even millions is called as high polymer or high-molecule compound. There are two types of high polymers including natural products and artificially synthetic product. Natural polymer such as protein is the polymers of amino acids while the starch and cellulose are the polymers (polysaccharides) of cyclic polyhydroxy, also known as biopolymers. Most of them are biodegradable and may cause short-term water BOD increment. It can also cause decomposition to generate pollutants such as ammonia, hydrogen sulfide and methane under anaerobic conditions, but will not cause long-term environmental impact. There are many types of synthetic polymers with their products having wide application. Related products include polyvinyl chloride and polystyrene plastics, resins, polyester and rubber. They are non-biodegradable substance. Long-term existence in the environment can cause a huge amount of garbage waste, among which the plasticizer will be evaporated out to pollute the environment, affecting human health at the same time. The monomers of polymer are mostly derived from petroleum, many of which are toxic and harmful substances, such as vinyl chloride which is a carcinogen. Nowadays, people are developing various polymer-containing oxide, peroxide-containing compounds and carbonyl-containing compounds. The polymer, under the sunlight photolysis, will be converted to low molecular weight organic compounds and further become harmless bio-degradable substance without contaminating the environment.

High molecular polymer is a compound consisting of one or several major structural units connecting with each other by covalent bond, also known polymers, high-molecule compound, macromolecular compounds and the like. E.g., polyethylene [-CH2-CH2-] n, Nylon 6 [-NH (CH2) 5CO-] n, whose structural units are respectively-CH2-CH2-, -NH (CH2) 5CO- with the polymerization degree being n.

Because of the high molecular weight (usually 104 to 106), it displays a number of special properties, such as relatively refractory soluble, or insoluble; swelling before being dissolved; much higher solution viscosity than a solution of equal concentration of small molecules; it has great intermolecular forces with usually exhibiting as only viscous liquid or solid form, not able to subject to gasification; the solid has a certain mechanical strength and can be subject to snagging and drawing.

The polymer is consists of a lot of macromolecular polymer chains of varying lengths, this feature is called the polydispersity of the molecular weight. We can use the distribution of the molecule weight to describe its polydispersity. The commonly referred molecular weight of the polymer is the average molecular weight of the polymer. Depending on the different statistical averaging method, there is number average molecular weight [equal to the total mass of the polymer (in g unit) divided by the total amount of the contained molecules of various molecule weights to represent Mm], weight average molecular weight (equal to the sum of the multiply of the molecules of various molecule weight and their corresponding molecular weight, expressed in Mm) and so on. Mm / Mm is called as polydispersity index, used to measure the width of the molecular weight distribution. The greater, the polydispersity index, the wider the molecular weight distribution will be and the greater the degree of dispersion.

The properties of polymers are still largely determined by the shape of the molecular chain. Depending on the shape of the molecular chain, it can be divided into linear, ball-type, network type and body-type, several structures.

The atoms of the main chain in the linear-structure polymer are often arranged in the shape of a long chain and the main chain is connected with in more or less amount of branches of varying lengths. When the polymer of such structure is heated, they tend to be melted, but also be soluble in certain organic solvents, having the probability of forming a crystal and can be oriented artificially. As some small amounts of branched-chain contained in increases the molecular spacing, the structure becomes loose, thereby reducing mechanical strength but increasing the solubility and plasticity. Common polymers belonging to this type include polyethylene, polyvinyl chloride and rubber.

The main chain of the ball-shape-structure polymer is also in long chain shape but with a large number of branches surrounding the main chain, making the molecule become globular. Its strength and elasticity is as high as that of the linear structure with no significant melting point but with excellent solubility. Phenolic resins, urea-formaldehyde resin which are the intermediate of reactions both belong to such structures.

The main chain of the high polymer of network structure is also in long chain shape, but has the bonds cross-linked, forming mesh-shape. It does not undergo melting at high temperatures but can be softened to have plasticity; it is not dissolved in an organic solvent but can swell, i.e. vulcanized rubber belongs to such type of polymer.

The high polymer of body structure has the long-chain as the main chain, being formed through the crosslink with many other molecules in three-dimensional space. However, during the process of polymerization of monomers, it can also be gradually formed through stepwise cross-linking.

The polymer of body structure is hard and brittle and can neither be melted in the high temperature nor do have plasticity. It can’t be dissolved in an organic solvent. The final products of phenol, aldehyde amine, epoxy and polyester, etc. all belong to this structure.
We can make classification for the polymer from different perspectives. According to the property and purpose, it can be divided into chemical fiber, plastics, rubber, paint and adhesives; According to the name of the synthetic reaction, it can be divided into addition polymer (such as polyethylene, polypropylene, etc.), condensation polymers (such as polyesters, polyamides etc.), ring-opening polymer (e.g., polyether, etc.); according to the source, it can be divided into natural polymers (e.g. starch, cellulose, etc.), synthetic polymers (e.g. vinyl polymers, etc.), semi-synthetic polymers (e.g. acetic acid cellulose and so on); according to the elements of the main chain, it can be divide into carbon-chain polymer (the main chain is mainly composed of carbon atoms), hetero chain polymer (the main chain contains, in addition to carbon atoms, oxygen, nitrogen, sulfur and other hetero atoms as well), element-organic polymer (main chain mainly composed of boron, silicon, aluminum, oxygen, nitrogen, sulfur and phosphorus atoms, but side-chain consists of organic groups such as methyl, ethyl, etc.); according to the application functions, it can be divided into general polymer, functional polymer and so on.

The major index of the polymers include strength, hardness, heat resistance, corrosion resistance, abrasion resistance, solvent resistance, light transmittance, and air tightness as well as electrically insulating properties. Density of the polymer is small, being much smaller than that of steel of the same volume; some of them are conductive, magnetic, and some are high temperature resistant, low temperature resistant and radiation resistant; some have excellent air tightness, transparency and so on. It has been widely used in medical, electrical conductivity, heat resistance, construction, packaging materials, plastic and some other fields.
The method of producing a polymer include bulk polymerization (including melt polymerization, referring to that monomer undergoes polymerization upon the action of light, heat and radiation without other media), solution polymerization (polymerization of monomer, initiator dissolved in an appropriate solution), emulsion (under the action of emulsifier and agitation, have the monomer be dispersed in water to form emulsion liquid to have polymerization), suspended polymerization (under the action of stirring and a dispersing agent, a monomer is dispersed into monomer droplets for being suspended in water for polymerization), etc., according to different requirements, we can apply different polymerization methods.

Click on the specific product, view the latest prices of the products, information, serving information
Structure Chemical Name CAS MF
c(RGDyk)-PEG-SH c(RGDyk)-PEG-SH
HZ-PEG-N3 HZ-PEG-N3
Cy3.5-PEG-SH Cy3.5-PEG-SH
NH2.HCl-PEG-NH2.HCl NH2.HCl-PEG-NH2.HCl
Diethoxylsilane-PEG-NH2 Diethoxylsilane-PEG-NH2
DSPE(Sodium salt)-PEG-OH DSPE(Sodium salt)-PEG-OH
Alkyne-PEG-Mal Alkyne-PEG-Mal
DBCO-PEG8-amine DBCO-PEG8-amine
Alcohols, C9-11, ethoxylated Alcohols, C9-11, ethoxylated 68439-46-3
Teflon emulsion JF-4DCD Teflon emulsion JF-4DCD
Parylene F Dimer Parylene F Dimer 1785-64-4 C16H8F8
BISPHENOL A DIGLYCIDYL ETHER RESIN BISPHENOL A DIGLYCIDYL ETHER RESIN 25068-38-6 C15H16O2
Paliocolor LC 756 Paliocolor LC 756 223572-88-1 C50H46O20
4-arM Poly(ethylene glycol) glycidyl ether 4-arM Poly(ethylene glycol) glycidyl ether
PEG400DA PEG400DA
NPC-PEG-NPC(NPC:4-nitrophenyl carbonate) NPC-PEG-NPC(NPC:4-nitrophenyl carbonate)
Biotin-PEG-MAL Biotin-PEG-MAL C24H37N5O6S
4-Arm PEG-Glutaric Acid 4-Arm PEG-Glutaric Acid
Fluorescein-PEG6-Acid Fluorescein-PEG6-Acid 2055014-69-0 C36H42N2O13S
Estrogen PEG DSPE Estrogen PEG DSPE
Linoleic acid PEG NHS Linoleic acid PEG NHS
Acryloyl PEG amine Acryloyl PEG amine
FMOC-NH-PEG10-NH2 FMOC-NH-PEG10-NH2
ACA-PEG-NH2 ACA-PEG-NH2
GAS-PEG-GAS GAS-PEG-GAS
8-arm-PEG-LA 8-arm-PEG-LA
Boc-NH-PEG-Alkyne Boc-NH-PEG-Alkyne
N3-PEG-COOH N3-PEG-COOH
Silane-PEG-N3 Silane-PEG-N3
CH2CH2COOH-PEG-CH2CH2COOH CH2CH2COOH-PEG-CH2CH2COOH
DMPE-PEG-CY3 DMPE-PEG-CY3
DSPE-PEG-OPSS DSPE-PEG-OPSS
Estrogen-PEG-Mal Estrogen-PEG-Mal
FITC-PEG-Estrogen FITC-PEG-Estrogen
Gala-PEG-SH Gala-PEG-SH
mPEG-N+Me3 mPEG-N+Me3
OH-PEG40-OH OH-PEG40-OH
PLA(2K)-PEG-OH PLA(2K)-PEG-OH
PLGA(18K)-PEG-Mal PLGA(18K)-PEG-Mal
STA-PEG-FA STA-PEG-FA
SVA-PEG-SVA SVA-PEG-SVA
Carbomer 956 Carbomer 956
Silane-PEG6-Biotin Silane-PEG6-Biotin
SH-(CH2)11-PEG3-COOH SH-(CH2)11-PEG3-COOH
SH-PEG7-SH SH-PEG7-SH
OH-PEG-SS OH-PEG-SS
Alkene-PEG-PLA(3K) Alkene-PEG-PLA(3K)
PLGA(10K)-PEG-Mal PLGA(10K)-PEG-Mal
Benzyl-PEG-OH Benzyl-PEG-OH
PLL-PEG-OH PLL-PEG-OH
PLGA(2K)-PEG-SC PLGA(2K)-PEG-SC
Phosphoric acid-PEG-COOH Phosphoric acid-PEG-COOH
ASP-PEG-ASP ASP-PEG-ASP
8-ArmPEG-(6Arm-Mal,2Arm-Biotin) 8-ArmPEG-(6Arm-Mal,2Arm-Biotin)
polyphenyl ether polyphenyl ether 31533-76-3 C30H22O4
Cy3.5-PEG-Mal Cy3.5-PEG-Mal
mPEG-DMPE(ammonium salt) mPEG-DMPE(ammonium salt)
PLA(2K)-PEG-NH2 PLA(2K)-PEG-NH2
cRGD-PEG-NH2 cRGD-PEG-NH2
Polyester Polyester 113669-95-7 C4H10O2·
Petroleum resins Petroleum resins 68131-77-1
1H-Isoindole-1,3(2H)-dione, 2-(2,6-dioxo-3-piperidinyl)-4-[[2-[2-(2-propyn-1-yloxy)ethoxy]ethyl]amino]- 1H-Isoindole-1,3(2H)-dione, 2-(2,6-dioxo-3-piperidinyl)-4-[[2-[2-(2-propyn-1-yloxy)ethoxy]ethyl]amino]- 2138439-56-0 C20H21N3O6
[mPEG-DSPE] 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxypoly(ethylene glycol)] [mPEG-DSPE] 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxypoly(ethylene glycol)]
PTFE dispersion JF-4DCA PTFE dispersion JF-4DCA
TAMRA-PEG4-alkyne TAMRA-PEG4-alkyne 1225057-68-0 C36H41N3O8
PTFE ultrafine powder PTFE ultrafine powder
Sintering agent Sintering agent
Methylamino-PEG3-azide Methylamino-PEG3-azide 1355197-57-7 C9H20N4O3
mPEG-SG(mPEG-Succinimidyl Glutarate ester ) mPEG-SG(mPEG-Succinimidyl Glutarate ester )
Fmoc-NH-PEG-SH Fmoc-NH-PEG-SH
Alkyne-PEG-IA Alkyne-PEG-IA
NH-(PEG3-acid)2 NH-(PEG3-acid)2 1814901-04-6 C18H35NO10
TAMRA-Azide-PEG-Biotin TAMRA-Azide-PEG-Biotin 1797415-74-7
Bromo-PEG6-azide Bromo-PEG6-azide 2062663-64-1 C14H29BrN3O6+
mPEG-TCO mPEG-TCO
Methotrexate PEG DSPE Methotrexate PEG DSPE
TCO PEG Biotin TCO PEG Biotin
Biotin-PEG6-NH2 Biotin-PEG6-NH2
SH-PEG6-N3 SH-PEG6-N3
IA-PEG4-Biotin IA-PEG4-Biotin
SAS-PEG-SAS SAS-PEG-SAS
Boc-NH-PEG-Mal Boc-NH-PEG-Mal
FITC-PEG-N3 FITC-PEG-N3
O-(2-Aminoethyl)-O'-[2-(Boc-amino)ethyl]polyethylene glycol 3000 O-(2-Aminoethyl)-O'-[2-(Boc-amino)ethyl]polyethylene glycol 3000 198227-38-2 C29H60N2O13
Vinyl resin Vinyl resin
Alcohols, C12-14, ethoxylated propoxylated Alcohols, C12-14, ethoxylated propoxylated 68439-51-0
[DSPE-PEG-MAL] α-Maleimidyl-ω-distearoyl-sn-glycero-3-phosphoethanolamino poly(ethylene glycol) [DSPE-PEG-MAL] α-Maleimidyl-ω-distearoyl-sn-glycero-3-phosphoethanolamino poly(ethylene glycol)
Teflon micropowder rubber and plastic Teflon micropowder rubber and plastic
PVM/MA PVM/MA 1644545-52-7 C14H13ClF6N6
CARBOPOL ETD 2020 CARBOPOL ETD 2020 176429-87-1
Poly(dimethylamine-co-epichlorohydrin-co-ethylenediamine) Poly(dimethylamine-co-epichlorohydrin-co-ethylenediamine) 42751-79-1 C7H20ClN3O
α-Azido-ω-MaleiMidyl poly(ethylene glycol) α-Azido-ω-MaleiMidyl poly(ethylene glycol)
acrylate-PEG-acrylate acrylate-PEG-acrylate
Thio-PEG12-acid Thio-PEG12-acid 1032347-93-5 C27H54O14S
6-NO2DA-PEG-OH 6-NO2DA-PEG-OH
COOH-PEG16-COOH COOH-PEG16-COOH
DMPE-PEG-Mal DMPE-PEG-Mal
DPPE-PEG-COOH DPPE-PEG-COOH
Estrogen-PEG-NH2 Estrogen-PEG-NH2
FA-PEG-FA FA-PEG-FA
HomePage | Member Companies | Advertising | Contact us | Previous WebSite | MSDS | CAS Index | CAS DataBase
Copyright © 2016 ChemicalBook All rights reserved.