4-Ethylmorpholin Chemische Eigenschaften,Einsatz,Produktion Methoden
ERSCHEINUNGSBILD
FARBLOSE FLüSSIGKEIT MIT CHARAKTERISTISCHEM GERUCH.
CHEMISCHE GEFAHREN
Zersetzung beim Erhitzen unter Bildung giftiger Gaseund D?mpfe (Ammoniak, Stickstoffoxide, Kohlenmonoxid). Reagiert sehr heftig mit starken Oxidationsmitteln unter Feuer- und Explosionsgefahr. Greift Kunststoff, Gummi und Beschichtungen an.
ARBEITSPLATZGRENZWERTE
TLV: 5 ppm (als TWA); Hautresorption; (ACGIH 2005).
MAK nicht festgelegt (DFG 2005),(s. Anm.)
AUFNAHMEWEGE
Aufnahme in den K?rper durch Inhalation der D?mpfe, über die Haut und durch Verschlucken.
INHALATIONSGEFAHREN
Beim Verdampfen bei 20°C kann schnell eine gesundheitssch?dliche Kontamination der Luft eintreten.
WIRKUNGEN BEI KURZZEITEXPOSITION
WIRKUNGEN BEI KURZZEITEXPOSITION: Die Substanz reizt die Augen, die Haut und die Atemwege. M?glich sind Auswirkungen auf die Augen mit nachfolgende verzerrtem Sehen.
LECKAGE
Belüftung. Zündquellen entfernen. Ausgelaufene Flüssigkeit m?glichst in abdichtbaren Beh?ltern sammeln. Reste mit Sand oder inertem Absorptionsmittel aufnehmen und an einen sicheren Ort bringen. Pers?nliche Schutzausrüstung: Atemschutzfilter für organische Gase und D?mpfe.
R-S?tze Betriebsanweisung:
R10:Entzündlich.
R21/22:Gesundheitssch?dlich bei Berührung mit der Haut und beim Verschlucken.
R34:Verursacht Ver?tzungen.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S45:Bei Unfall oder Unwohlsein sofort Arzt zuziehen (wenn m?glich, dieses Etikett vorzeigen).
S16:Von Zündquellen fernhalten - Nicht rauchen.
Physikalische Eigenschaften
Colorless, flammable liquid with an ammonia-like odor. Experimentally determined detection and
recognition odor threshold concentrations were 400 μg/m
3 (85 ppb
v) and 1.2 mg/m
3 (250 ppb
v),
respectively (Hellman and Small, 1974).
Verwenden
N-Ethylmorpholine is a component of the buffer used in basic peptide separation through anion-exchange chromatography. Further, it acts as a catalyst in the preparation of polyurethane foam.
synthetische
N-Ethylmorpholine is synthesized by the reaction of morpholine with bromoethane.
Allgemeine Beschreibung
N-Ethylmorpholine appears as a colorless liquid with a strong ammonia-like odor. Severely irritates skin, eyes, and mucous membranes. Moderately soluble in water and less dense than water. Flash point 83°F.
Air & Water Reaktionen
Highly flammable. Moderately soluble in water .
Reaktivit?t anzeigen
N-Ethylmorpholine can react vigorously with oxidizing materials. N-Ethylmorpholine dissolves LiAlH4.
Hazard
Irritant to skin and eyes, absorbed by
skin. Flammable, moderate fire risk. Toxic by skin
absorption.
Health Hazard
Exposure can cause irritation of eyes, nose and throat. Contact with eyes may result in foggy vision and seeing halos around lights.
Sicherheitsprofil
oison by intravenous
route. Moderately toxic by ingestion. Mildly
toxic by inhalation. A skin and severe eye
irritant. A very dangerous fire hazard when
exposed to heat or flame; can react
vigorously with oxidzing materials. To fight
fire, use alcohol foam, foam, CO2, dry
chemical. When heated to decomposition it
emits toxic fumes of NOx.
m?gliche Exposition
Primary irritant (without allergic reaction). This material is used as a catalyst in polyurethane
foam production. It is a solvent for dyes and resins. It is
used as an intermediate in surfactant, dye, pharmaceutical,
and rubber chemical manufacture
Environmental Fate
Chemical/Physical. Releases toxic nitrogen oxides when heated to decomposition (Sax and
Lewis, 1987).
At an influent concentration of 1,000 mg/L, treatment with GAC resulted in an effluent
concentration of 467 mg/L. The adsorbability of the carbon used was 107 mg/g carbon (Guisti et
al., 1974).
Versand/Shipping
UN2920 Corrosive liquids, flammable, n.o.s.,
Hazard class: 8; Labels: 8-Corrosive material, 3-Flammable
liquid. UN1993 Flammable liquids, n.o.s., Hazard Class: 3;
Labels: 3-Flammable liquid, Technical Name Required
Inkompatibilit?ten
May form explosive mixture with air.
Incompatible with oxidizers (chlorates, nitrates, peroxides,
permanganates, perchlorates, chlorine, bromine, fluorine,etc.); contact may cause fires or explosions. Keep away
from alkaline materials, strong bases, strong acids, oxoacids, and epoxides. Corrodes some metals. Unless inhibited,
violent polymerization can occur from heat, sunlight, and
contact with strong oxidizers permanganates, perchlorates, chlorine, bromine, fluorine,
etc.); contact may cause fires or explosions. Keep
away from alkaline materials, strong bases, strong acids,
oxoacids, and epoxides. Attacks some plastics, rubber and
coatings
Waste disposal
Controlled incineration (oxides of nitrogen are removed from the effluent gas by scrubbers and/or thermal devices).
4-Ethylmorpholin Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte