2-Nitrobenzaldehyd Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R22:Gesundheitssch?dlich beim Verschlucken.
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R68:Irreversibler Schaden m?glich.
S-S?tze Betriebsanweisung:
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S24/25:Berührung mit den Augen und der Haut vermeiden.
S36/37/39:Bei der Arbeit geeignete Schutzkleidung,Schutzhandschuhe und Schutzbrille/Gesichtsschutz tragen.
S36:DE: Bei der Arbeit geeignete Schutzkleidung tragen.
Chemische Eigenschaften
yellow or bright yellow needle-like crystals. It can volatilize with water vapor and has the fragrance of benzaldehyde. Soluble in ethanol, ether, benzene, slightly soluble in water, flash point>110℃, reacts violently with pyrrole.
Verwenden
2-Nitrobenzaldehyde is a benzaldhyde with a nitro group substituted in the ortho position. 2-Nitrobenzaldehyde is used in the preparation of dyes and colorants such as Indigo carmine. 2-Nitrobenzaldehyde gas been shown to be a useful photoremovable protecting group as well as in the preparation of more effective ones such as o-Nitrophenylethylene glycol.
Definition
ChEBI: 2-nitrobenzaldehyde is benzaldehyde substituted at the ortho-position with a nitro group. It is a C-nitro compound and a member of benzaldehydes.
synthetische
2-Nitrobenzaldehyde is synthesized from 2-Nitrotoluene by nitration and oxidation.
Synthesis of 2-Nitrobenzaldehyde from 2-Nitrotoluene
Allgemeine Beschreibung
The 2-Nitrobenzyl group of 2-nitrobenzaldehyde is photolabile that can be cleaved when exposed to UV-light.
Synthese
50 g (0.24 mol) of 2-nitrophenylpyruvic acid of melting point 115° C are introduced into 500 ml of aqueous sodium carbonate until a clear solution is obtained. After the addition of 350 ml of toluene, the mixture is cooled to 0° C, and 40 g of solid potassium permanganate is then added in portions at 0°- 3° C. After one hour at 0°- 3° C, 95 ml of 50% strength sulphuric acid are added dropwise. The temperature is not allowed to rise above 30° C. The reaction mixture is filtered, and the toluene phase is separated from the filtrate. The filter residue is washed with toluene, and the combined toluene phases are extracted with 15% strength sodium carbonate solution and with water. The toluene phase is then dried with sodium sulfate and concentrated in a vacuo. The remaining residue consists of 19.7 g (54.7% of theory) of 2-nitrobenzaldehyde, which crystallizes on cooling.
l?uterung methode
Crystallise the aldehyde from toluene (2-2.5mL/g) by addition of 7mL pet ether (b 40-60o) for 1mL of solution. It can also be distilled under reduced pressures. [Beilstein 7 IV 584.]
2-Nitrobenzaldehyd Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
Chinolin-2-amin
Chinolin-2-carbaldehyd
2-(3-Hydroxy-2-chinolyl)-1H-inden-1,3(2H)-dion
2-methylquinolin-3-ol
Nisoldipine
BENZAMIDE, 4-METHOXY-N-[2-[2-(1-METHYL-2-PIPERIDINYL)ETHYL]PHENYL]-
1,4-Dihydro-2,6-dimethyl-4-(2-ni-trophenyl)-3,5-pyridindicarbon-s?ure-dimethylester
(1H-INDAZOL-3-YL)-ACETIC ACID
2-Aminobenzaldehyd
2-Amino-3,5-dibrombenzaldehyd
trans-4-[[(2-Amino-3,5-dibromphenyl)methyl]amino]cyclohexan-1-olhydrochlorid
Benzenepropanoic acid, β-amino-2-nitro-, methyl ester
Etaqualone
2-(2-Aminophenyl)benzothiazole
nifedipine iMpurity C
3-Amino-3-(2-nitrophenyl)propanoic acid
2-(1,3-Dihydro-3-oxo-2H-indol-2-yliden)-1,2-dihydro-3H-indol-3-on
MFCD00594851
(2-Nitrophenyl)(pyridin-3-yl)methanol
