INDIUM TIN OXIDE
|
|
|
- CAS-Nr.
- 50926-11-9
- Englisch Name:
- INDIUM TIN OXIDE
- Synonyma:
- ITO;Indium Tin Oxides;F-ITO;X 101;UFP-HX;ITO 3Mb;SUFP-HX;nm (SEM);D 01-9000;CID 57350325
- CBNumber:
- CB1199228
- Summenformel:
- In2O5Sn
- Molgewicht:
- 428.34
- MOL-Datei:
- 50926-11-9.mol
|
INDIUM TIN OXIDE Eigenschaften
- Schmelzpunkt:
- 287℃
- Siedepunkt:
- 82 °C
- Dichte
- 1.2 g/mL at 25 °C(lit.)
- Brechungsindex
- n20/D 1.5290-1.5460(lit.)
- Flammpunkt:
- 57.2 °F
- storage temp.
- -20°C
- Aggregatzustand
- nanopowder
- Farbe
- Yellow-green
- Wasserl?slichkeit
- Insoluble in water.
- Expositionsgrenzwerte
- ACGIH: TWA 0.1 mg/m3
NIOSH: TWA 0.1 mg/m3
- CAS Datenbank
- 50926-11-9(CAS DataBase Reference)
- IARC
- 2B (Vol. 118) 2018
- EPA chemische Informationen
- Indium tin oxide (50926-11-9)
Sicherheit
- Risiko- und Sicherheitserkl?rung
- Gefahreninformationscode (GHS)
| Bildanzeige (GHS) |
 
|
| Alarmwort |
Achtung |
| Gefahrenhinweise |
| Code |
Gefahrenhinweise |
Gefahrenklasse |
Abteilung |
Alarmwort |
Symbol |
P-Code |
| H225 |
Flüssigkeit und Dampf leicht entzündbar. |
Entzündbare Flüssigkeiten |
Kategorie 2 |
Achtung |
![GHS hazard pictograms]() src="/GHS02.jpg" width="20" height="20" /> |
P210,P233, P240, P241, P242, P243,P280, P303+ P361+P353, P370+P378,P403+P235, P501 |
| H319 |
Verursacht schwere Augenreizung. |
Schwere Augenreizung |
Kategorie 2 |
Warnung |
![GHS hazard pictograms]() src="/GHS07.jpg" width="20" height="20" /> |
P264, P280, P305+P351+P338,P337+P313P |
| H336 |
Kann Schl?frigkeit und Benommenheit verursachen. |
Spezifische Zielorgan-Toxizit?t (einmalige Exposition) |
Kategorie 3 (Schl?frigkeit und Benommenheit) |
Warnung |
|
P261, P271, P304+P340, P312,P403+P233, P405, P501 |
|
| Sicherheit |
| P210 |
Von Hitze, hei?en Oberfl?chen, Funken, offenen Flammen und anderen Zündquellenarten fernhalten. Nicht rauchen. |
| P233 |
Beh?lter dicht verschlossen halten. |
| P240 |
Beh?lter und zu befüllende Anlage erden. |
| P241 |
Explosionsgeschützte [elektrische/Lüftungs-/ Beleuchtungs-/...] Ger?te verwenden. |
| P242 |
Nur funkenfreies Werkzeug verwenden. |
| P305+P351+P338 |
BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach M?glichkeit entfernen. Weiter spülen. |
|
INDIUM TIN OXIDE Chemische Eigenschaften,Einsatz,Produktion Methoden
R-S?tze Betriebsanweisung:
R36/37/38:Reizt die Augen, die Atmungsorgane und die Haut.
R67:D?mpfe k?nnen Schl?frigkeit und Benommenheit verursachen.
R11:Leichtentzündlich.
S-S?tze Betriebsanweisung:
S7:Beh?lter dicht geschlossen halten.
S16:Von Zündquellen fernhalten - Nicht rauchen.
S24/25:Berührung mit den Augen und der Haut vermeiden.
S26:Bei Berührung mit den Augen sofort gründlich mit Wasser abspülen und Arzt konsultieren.
S36/37:Bei der Arbeit geeignete Schutzhandschuhe und Schutzkleidung tragen.
Verwenden
Indium tin oxide is used as intermediates.
Allgemeine Beschreibung
Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films.
INDIUM TIN OXIDE Upstream-Materialien And Downstream Produkte
Upstream-Materialien
Downstream Produkte
INDIUM TIN OXIDE Anbieter Lieferant Produzent Hersteller Vertrieb H?ndler.
Global( 138)Lieferanten
50926-11-9()Verwandte Suche:
- INDIUM TIN OXIDE
- indium tin oxide, 3mm-12mm pieces, 91:9 w/w
- indium tin oxide, dispersion
- indium tin oxide, vacuum deposition grade
- ito coated slide
- Indium stannic oxide
- Indium tin oxide, 99.5% min (metals basis)
- Indium tin oxide, NanoTek, 99.5%
- Indium tin oxide coated glass slide,square
- ITO coated slide, square
- Indium tin oxide coated PET
- Polyethylene terephthalate film, ITO coated
- Indium tin oxide coated glass slide, rectangular
- ITO coated slide, rectangular
- Indium tin oxide, NanoTek|r, 99.5%
- Indium tin oxide sputtering target, 76.2mm (3.0in) dia x 6.35mm (0.25in) thick, 10% wt, 99.99% (meta
- Indium tin oxide/ 99.99%
- Indium tin oxide,ITO
- Indium tin oxide coated glass slide, rectangular,ITO coated slide, rectangular
- Indium tin oxide coated aluminosilicate glass slide,ITO coated slide
- Indium tin oxide coated glass slide, square surface resistivity 70-100 Omega/sq
- Indium tin oxide nanopowder, <50 nm particle size
- 90:10 wt. %, 99.5%
- Indium tin oxide, In2O3:SnO2
- 90:10 wt. %, 99.99% trace metals basis
- Indium tin oxide, 3 to 12mm pieces, 91:9 w/w
- Indium tin oxide NanoTek?
- INDIUM TIN OXIDE COATED PET SHEET, 35 OHM/SQ SURFACE RESISTIVITY (1EA=1FT X 1FT, 5EA = 5 X 1FT X 1FT)
- Indium tin oxide coated glass slide, 15-25 O/sq surface resistivity
- INDIUM TIN OXIDE COATED PET SHEET, 100 OHM/SQ SURFACE RESISTIVITY (1EA=1FT X 1FT, 5EA = 5 X 1FT X 1FT)
- Indium tin oxide coated glass slide, 30-60 O/sq surface resistivity
- Indium tin oxide coated glass slide, 70-100 omega/sq surface resistivity
- INDIUM TIN OXIDE, NANOPOWDER, <50NM
- Indium tin oxide coated PET slide, 60-100 O/sq surface resistivity
- INDIUM TIN OXIDE COATED PET SHEET, 60 OHM/SQ SURFACE RESISTIVITY (1EA=1FT X 1FT, 5EA = 5 X 1FT X 1FT)
- Indium tin oxide coated PET slide, 8-12 O/sq surface resistivity
- Indium tin oxide coated aluminosilicate glass slide, 5-15 O/sq surface resistivity
- INDIUM TIN OXIDE, NANOPARICLES, <50NM, 25 WT.% DISPERSION IN ISOPROPANOL
- Indium tin oxide coated glass slide, 8-12 O/sq surface resistivity
- INDIUM TIN OXIDE COATED PET SHEET, 45 O&
- INDIUM-TIN OXIDE, -325 MESH, 99.99+%
- Indium tin oxide, 3mm-12mm pieces, 91:9 w/w, 99.997%
- 3-12mmpieces,91:9w/w,99.997%
- Indiumtinoxide,99.99%(metalsbasis)
- Indiumtinoxide,VacuumDepositionGrade,99.99%(metalsbasis)
- IndiuM-Tin Oxide, -325 Mesh
- IndiuM tin oxide -325 Mesh, >=99.99% trace Metals basis
- IndiuM tin oxide coated glass slide, square surface resistivity 8-12 OMega/sq
- IndiuM tin oxide, dispersion <100 nM particle size (DLS), 30 wt. % in isopropanol
- Indium tin oxide coated boro-aluminosilicate glass slide
- Indium tin oxide >=99.5% trace metals basis, 18 nm particle size (SEM), 20 wt. % in H2O
- Indium tin oxide coated glass slide, rectangular surface resistivity 15-25 Omega/sq, slide
- Indium tin oxide coated glass slide, rectangular surface resistivity 70-100 Omega/sq, slide
- Indium tin oxide coated glass slide, rectangular surface resistivity 8-12 Omega/sq, slide
- Indium tin oxide coated glass slide, square surface resistivity 30-60 Omega/sq, slide
- indium tin oxide coated aluminosilicate glass slide
- indium tin oxide coated glass slide
- D 01-9000
