| Identification | More | [Name]
ETHYLENE | [CAS]
74-85-1 | [Synonyms]
ETHYLENE
Acetene
Athylen
bicarburettedhydrogen
Bicarburretted hydrogen
bicarburrettedhydrogen
C2H4
Elayl
Ethen
Ethylen
ethylene,refrigeratedliquid(cryogenicliquid)
etileno
Liquid ethyene
liquidethyene
liquidethylene
Olefiant gas
olefiantgas
R1150
R-1150
ETHYLENE, 99.5+% | [EINECS(EC#)]
200-815-3 | [Molecular Formula]
C2H4 | [MDL Number]
MFCD00008604 | [Molecular Weight]
28.05 | [MOL File]
74-85-1.mol |
| Chemical Properties | Back Directory | [Appearance]
Ethylene, an alkene is a colorless gas (at room
temperature). Sweet odor. Minimum detectable odor 5
260 ppm. | [Melting point ]
−169 °C(lit.)
| [Boiling point ]
−104 °C(lit.)
| [density ]
0.00126 | [vapor density ]
0.97 (vs air)
| [vapor pressure ]
35.04 atm ( 20 °C)
| [refractive index ]
1.363 | [Fp ]
-100 °C | [form ]
Colorless gas | [Stability:]
Stable. Highly flammable-note wide explosion limits. Incompatible with strong oxidizing agents. Readily forms explosive mixtures with air. | [explosive limit]
36% | [Water Solubility ]
90.91g/L(25 ºC) | [FreezingPoint ]
-169.4℃ | [Merck ]
13,3825 | [BRN ]
1730731 | [CAS DataBase Reference]
74-85-1(CAS DataBase Reference) | [IARC]
3 (Vol. Sup 7, 60) 1994 | [NIST Chemistry Reference]
Ethylene(74-85-1) | [EPA Substance Registry System]
74-85-1(EPA Substance) |
| Questions And Answer | Back Directory | [Uses]
Chemical intermediate in the manufacture of polyethylene, ethylene oxide, ethylene dichloride, and ethyl benzene; used as a fruit and vegetable ripening agent | [Uses]
Ethylene finds use in the manufacture of ethyl benzene, ethanol, ethylene oxide, ethylene glycol, and ethylene dichloride. About half of the ethylene produced in the United States is used for the production of high- and low-density polyethylene plastics. Other chemical raw materials made with ethylene include ethyl chloride, dichloroethane, vinyl chloride, ethyl ether, methyl acrylate, and styrene.
Ethylene is also used as a refrigerant and a fuel for metal cutting and welding, and it has been used for anesthesia. It is also used to accelerate plant growth and fruit ripening. |
| Safety Data | Back Directory | [Hazard Codes ]
F+,F | [Risk Statements ]
R12:Extremely Flammable.
R67:Vapors may cause drowsiness and dizziness. | [Safety Statements ]
S9:Keep container in a well-ventilated place .
S16:Keep away from sources of ignition-No smoking .
S33:Take precautionary measures against static discharges .
S46:If swallowed, seek medical advice immediately and show this container or label . | [RIDADR ]
UN 1962 2.1
| [WGK Germany ]
-
| [RTECS ]
KU5340000
| [F ]
4.5-31 | [Autoignition Temperature]
842 °F | [DOT Classification]
2.1 (Flammable gas) | [HazardClass ]
2.1 | [HS Code ]
29012100 | [Safety Profile]
Suspected carcinogen.
A simple asphyxiant. High concentrations
cause anesthesia. A common air
contaminant. It is phytotoxic. A very
dangerous fire hazard when exposed to heat
or flame. Moderate explosion hazard when
exposed to flame. A flammable gas. To figh fire, stop flow of gas, use Co2, dry chemical,
or fine water spray. Mixtures with aluminum
chloride explode in the presence of nickel
catalysts, methyl chloride, or nitromethane.
Explosive reaction with
bromotrichloromethane (at 120℃/51 bar),
carbon tetrachloride (25-100°C/30 bar).
Explosive reaction with chlorine catalyzed
by sunlight or UV light or in the presence of
mercury(I) oxide, mercury(Ⅱ) oxide, or
silver oxide. Mixtures with
chlorotrifluoroethylene polymerize
explosively when exposed to 50 kV gamma
rays at 308 krad/hr. Has been involved in
industrial accidents. Violent polymerization
is catalyzed by copper above 4OO0C/54 bar.
Incompatible with AlCl3, (CC4 + benzoyl
peroxide), (bromotrichloromethane +
NCh), 03, CCl4, Cl2, NOx,
tetrafluoroethylene trifluorohypofluorite.
When heated to decomposition it emits
acrid smoke and irritating fumes | [Hazardous Substances Data]
74-85-1(Hazardous Substances Data) | [Toxicity]
LC for mice in air: 950,000 ppm (Flury) |
| Hazard Information | Back Directory | [General Description]
A colorless gas with a sweet odor and taste. ETHYLENE(74-85-1) is lighter than air. ETHYLENE(74-85-1) is easily ignited and a flame can easily flash back to the source of the leak. Under prolonged exposure to fire or heat the containers may rupture violently and rocket. Can cause explosion. | [Reactivity Profile]
Peroxidizable monomer may initiate exothermic polymerization of the bulk material [Bretherick 1979. p. 160]. Ethylene in the presence of aluminum chloride may undergo a violent reaction [J. Inst. Pet. 33:254. 1947]. Ozone and ethylene react explosively [Berichte 38:3837]. Ethylene can polymerize at low pressure if catalyzed by titanium halides. (Sundaram, K. M, M. M. Shreehan, E. F. Olszewski. thylene. Kirk-Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. 2001.) | [Air & Water Reactions]
Highly flammable. | [Hazard]
Highly flammable, dangerous fire and
explosion risk; explosive limits in air 3–36% by
volume. Simple asphyxiant; questionable carcinogen. | [Health Hazard]
Moderate concentration in air causes drowsiness, dizziness, and unconsciousness. Overexposure causes headache, drowsiness, muscular weakness. | [Potential Exposure]
Ethylene is used in production of fabricated plastics, antifreeze; making fibers; to manufacture ethylene oxide, polyethylene for plastics, alcohol, mustard gas and
other organics. It is used to accelerate ripening of fruit; as an
anesthetic; and for oxyethylene welding and cutting of metals | [First aid]
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Seek medical attention immediately.
If this chemical has been inhaled, remove from exposure,
begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR if
heart action has stopped. Transfer promptly to a medical
facility. When this chemical has been swallowed, get medical attention. Give large quantities of water and induce
vomiting. Do not make an unconscious person vomit. If
frostbite has occurred, seek medical attention immediately;
do NOT rub the affected areas or flush them with water. In
order to prevent further tissue damage, do NOT attempt to
remove frozen clothing from frostbitten areas. If frostbite
has NOT occurred, immediately and thoroughly wash
contaminated skin with soap and water. | [Shipping]
UN1962 Ethylene, Hazard Class: 2.1; Labels:
2.1-Flammable gas; UN1038 Ethylene, refrigerated liquid
(cryogenic liquid), Hazard Class: 2.1; Labels: 2.1-
Flammable gas. Cylinders must be transported in a secure
upright position, in a well-ventilated truck. Protect cylinder
and labels from physical damage. The owner of the compressed gas cylinder is the only entity allowed by federal
law (49CFR) to transport and refill them. It is a violation
of transportation regulations to refill compressed gas cylinders without the express written permission of the owner. | [Incompatibilities]
A highly flammable gas at room temperature. Contact with oxidizers may cause explosive polymerization and fire. May be spontaneously explosive in
sunlight or ultraviolet light when mixed with chlorine.
Reacts violently with mixtures of carbon tetrachloride and
benzoyl peroxide; bromotrichloromethane; aluminum chloride and ozone. Incompatible with acids, halogens, nitrogen
oxides; hydrogen bromide; aluminum chloride; chlorine
dioxide; nitrogen dioxide. May accumulate static electrical
charges, and may cause ignition of its vapors. | [Description]
Ethylene is a colorless, odorless gas that is the simplest alkene hydrocarbon. It is a natural plant
hormone and is produced synthetically from natural gas and petroleum. The double bond in
ethylene makes this compound highly reactive, and the volume of ethylene used in the chemical
industry is greater than any other organic compound. | [Chemical Properties]
colourless gas | [Chemical Properties]
Ethylene, an alkene is a colorless gas (at room
temperature). Sweet odor. Minimum detectable odor 5
260 ppm. | [Waste Disposal]
Return refillable compressed
gas cylinders to supplier | [Definition]
ethylene: A colourlessflammable gaseous hydrocarbon,C2H4; m.p. –169°C; b.p. –103.7°C. It isthe first member of the alkene seriesof hydrocarbons. It is made bycracking hydrocarbons from petroleumand is now a major raw materialfor making other organicchemicals (e.g. ethanal, ethanol,ethane-1,2-diol). It can be polymerizedto polyethene. It occurs naturallyin plants, in which it acts as agrowth substance promoting theripening of fruits. | [Production Methods]
Ethylene is primarily obtained from the ethane and propane components of natural gas andfrom the naphtha, kerosene, and gas oil components of crude oil. It can also be synthesizedthrough the dehydration of ethanol (C2H5OH). The production of ethylene from hydrocarbonfeedstocks involves mixing with steam and then subjecting the hydrocarbons to thermalor catalytic cracking. Cracking is a process in which organic molecules are broken down intosmaller molecules. Thermal cracking involves the use of heat and pressure. Catalytic crackinguses various catalysts to reduce the amount of heat and pressure required in the process.Th ermal cracking of hydrocarbons to ethylene occurs between approximately 650°C and800°C (1200°F and 1500°F). After hydrocarbons are cracked, a mixture containing ethyleneand other gases such as methane, ethane, and propane is obtained. Ethylene is separated fromthese through physical processes such as fractional distillation, refrigeration, absorption, oradsorption. | [Reactions]
Ethylene reacts: (1) with the halogens to form substitution halides; (2) with hypochlorous and hypobromous acid to form ethylene chlorohydrin or ethylene bromohydrin, respectively; (3) with hydrogen iodide or bromide (not chloride) to form ethyl iodide or ethyl bromide; (4) with hydrogen, in the presence of a catalyst, e.g., finely divided nickel at 150 °C, to form ethane; (5) with concentrated sulfuric acid at 160 °C to form ethyl hydrogen sulfate; and (6) with potassium permanganate to form ethylene glycol, although glycol is preferably made from ethylene dichloride or chlorohydrin. | [Fire Hazard]
Flammable gas; burns with a luminous flame;
autoignition temperature 490°C (914°F)
(NFPA 1997), 543°C (1009°F) (Merck
1996); fire-extinguishing measure: shut off
the flow of gas; use a water spray to keep
fire-exposed containers cool.
Ethylene forms explosive mixtures in
air; the LEL and UEL values are 2.7%
and 36% by volume of air, respectively.
Its reaction with fluorine is explosively
violent (△H=- 112 kcal/mol), and violent
with chlorine (△H=- 36 kcal/mol). In the
presence of sunlight or UV light, an ethylene–
chlorine mixture will explode spontaneously.
The reaction is explosive at room
temperature over the oxides of mercury or
silver (Mellor 1946, Suppl. 1956). Ethylene
reacts vigorously with oxidizing substances.
It reacts with ozone to form ethylene
ozonide, H2C(O3)CH2, which is unstable
and explodes on mechanical shock. Acidcatalyzed
addition of hydrogen peroxide
may produce ethyl hydroperoxide, which is
unstable and explodes on heat or shock:. | [Industrial uses]
Ethylene, also called ethane, is a colorless,inflammable gas, CH2:CH2, produced in thecracking of petroleum. Ethylene liquefies at–68.2°C. Ethylene is the largest-volume organicchemical produced today, and is the basic buildingblock of the petrochemical industry. Polymerizationof ethylene is its largest use. Whenethylene is reacted in the presence of transitionmetal catalysts, such as Mo2O5 or Cr2O3, at highpressures, it forms low-density polyethylene(LDPE); at lower pressures, high-density polyethylene(HDPE) is produced. Recently, lowpressures have been employed for making a newvariant, linear low-density polyethylene(LLDPE). Ethylene is now used to produce ethylalcohol, acrylic acid, and styrene, and it is thebasis for many types of reactive chemicals.
Trichloroethylene is a colorless liquid ofpleasant odor of the composition CHCl:CCl2,also known as westrosol. Its boiling point is87°C and its specific gravity 1.471. It is insolublein water and is unattacked by dilute acidsand alkalis. It is non flammable and is less toxicthan tetrachlorethane. Trichloroethylene is apowerful solvent for fats, waxes, resins, rubber,and other organic substances, and is employedfor the extraction of oils and fats, for cleaningfabrics, and for degreasing metals preparatoryto plating. The freezing point is –88°C, and itis also used as a refrigerant. It is also used insoaps employed in the textile industry fordegreasing. | [Materials Uses]
Installations must be designed to withstand the
pressures involved and must comply with all
applicable regulations. Because it is noncorrosive,
any common commercially available metals
may be used with ethylene. | [Physiological effects]
When used for anesthesia, ethylene is a nontoxic
gas found pleasant and nonirritating by
patients. Prolonged inhalation of substantial
concentrations results in unconsciousness; light
and moderate anesthesia is attained, and deep
anesthesia seldom occurs.
Inhalation is fatal only if the gas acts as a
simple asphyxiant, depriving the body of necessary
oxygen. Because of its flammability, however,
other agents have replaced ethylene for
use in anesthesia in the United States and Canada.
No deleterious action by ethylene on circulatory,
respiratory, or other systems or organs has
been observed. Exhalation eliminates the major
portion of ethylene within minutes, although
complete desaturation from body fat takes several
hours. Minute traces can be detected in the
blood a number of hours after anesthesia has
ended. | [Carcinogenicity]
A case-control study of brain
cancer among Texas petrochemical workers reported
increased risks associated with exposure to multiple chemicals,
including ethene. The findings were not
statistically significant. The risks for ethene have not been
shown to increase with increasing duration of employment. The observed increases could not be attributed to specific
chemical exposures. | [Environmental Fate]
Emitted ethene is distributed primarily into the atmosphere
and reacts with photochemically reactive hydroxyl radicals,
ozone, and nitrate radicals, with half-lives ranging from 1.9,
6.5, and 190 days, respectively. Biodegradation in water occurs
with half-lives in the range of 1–28 days, or under anaerobic
conditions, 3–112 days. Bioaccumulation in aquatic organisms
is not expected to occur, based on ethene’s high vapor pressure
and log octanol/water partition coefficient. | [storage]
Ethylene is stored in a cool, well-ventilatedarea isolated from oxygen, chlorine, andflammable and oxidizing substances. It isprotected against lightning, statical electricity,heat, and physical damage. It is shippedin steel pressure cylinders and tank barges. | [Purification Methods]
Purify ethylene by passage through a series of towers containing molecular sieves or anhydrous CaSO4 or a cuprous ammonia solution, then conc H2SO4, followed by KOH pellets. Alternatively, it has been condensed in liquid nitrogen, with melting, freezing and pumping to remove air before passage through an activated charcoal trap, followed by a further condensation in liquid air. A sputtered sodium trap was used to remove oxygen. [Beilstein 1 IV 677.] | [Toxicity evaluation]
Ethene is classified as a simple asphyxiant. In sufficient
concentrations, ethene causes central nervous system depression
and unconsciousness by displacing oxygen in air, which
reduces the oxygen available to support cell function. | [GRADES AVAILABLE]
Ethylene is typically available for commercial
and industrial purposes in a c.P. grade
(minimum purity of 99.5 mole percent), and a
technical grade (minimum purity of 98.1 mole percent). |
|
| Company Name: |
Maharashtra Gas Co
|
| Tel: |
+91-8097713800 +91-9833780675 |
| Website: |
www.maharashtragas.com |
|