| Identification | More | [Name]
4-Chloro-3-methylphenol | [CAS]
59-50-7 | [Synonyms]
2-CHLORO-5-HYDROXYTOLUENE
3-Methyl-4-chlorophenol
4-CHLORO-3-CRESOL
4-CHLORO-3-METHYLHYDROXYBENZENE
4-CHLORO-3-METHYLPHENOL
4-CHLORO-M-CRESOL
4-CMC
6-CHLORO-3-HYDROXYTOLUENE
CHLORO(4-)-3-METHYLPHENOL
PARA CHLORO META CRESOL
P-CHLORO-M-CRESOL
PCMC
1-Chloro-2-methyl-4-hydroxybenzene
2-Chloro-hydroxytoluene
4-chloro-1-hydroxy-3-methylbenzene
4-chloro-3-methyl-pheno
4-chloro-3-methylphenol(p-chlorocresol)
4-Chloro-5-methylphenol
4-chloro-m-creso
ai3-00075 | [EINECS(EC#)]
200-431-6 | [Molecular Formula]
C7H7ClO | [MDL Number]
MFCD00002323 | [Molecular Weight]
142.58 | [MOL File]
59-50-7.mol |
| Chemical Properties | Back Directory | [Appearance]
White (pure) or pink crystalline solid. Crystals
turn pink on exposure to air and light. Phenolic odor. | [Melting point ]
63-65 °C(lit.)
| [Boiling point ]
235 °C(lit.)
| [density ]
1.370 | [vapor pressure ]
<0.1 hPa (20 °C) | [refractive index ]
1.5449 (estimate) | [Fp ]
118 °C
| [storage temp. ]
-20°C | [solubility ]
methanol: soluble1g/10 mL, clear, colorless | [form ]
Tablets | [pka]
pKa 9.55(t = 25) (Uncertain) | [color ]
White | [PH]
6.5 (1g/l, H2O, 20℃) | [Stability:]
Stable. Incompatible with brass, oxidizing agents, copper, copper alloys. | [Water Solubility ]
4 g/L (20 ºC) | [Merck ]
14,2133 | [BRN ]
1237629 | [Henry's Law Constant]
2.5(x 10-6 atm?m3/mol)at 20 °C (calculated, Mabey et al., 1982) | [Contact allergens]
Chlorocresol is a biocide used for its disinfectant and
preservative properties, in topicals or cutting fluid. | [InChIKey]
CFKMVGJGLGKFKI-UHFFFAOYSA-N | [LogP]
3.100 | [Uses]
P-chloro-m-cresol is used as a preservative in a wide number of topical preparations and is a rare cause of allergic contact dermatitis and CoU, the mechanism of which remains uncertain. | [CAS DataBase Reference]
59-50-7(CAS DataBase Reference) | [NIST Chemistry Reference]
Phenol, 4-chloro-3-methyl-(59-50-7) | [EPA Substance Registry System]
p-Chloro-m-cresol (59-50-7) |
| Hazard Information | Back Directory | [Chemical Properties]
white or pink crystals | [Uses]
antiinfectant | [Uses]
Disinfectant; pharmaceutic aid (preservative). | [General Description]
A pinkish to white crystalline solid with a phenolic odor. Melting point 64-66°C. Shipped as a solid or in a liquid carrier. Soluble in aqueous base. Toxic by ingestion, inhalation or skin absorption. Used as an external germicide. Used as a preservative in paints and inks. | [Reactivity Profile]
CHLOROCRESOL(59-50-7)S are incompatible with bases, acid chlorides, acid anhydrides, and oxidizing agents. Corrodes steel, brass, copper and copper alloys . | [Air & Water Reactions]
Hygroscopic. Soluble in aqueous base. | [Hazard]
Irritant to skin. | [Health Hazard]
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. | [Potential Exposure]
Chlorinated phenol fungicide, microbiocide, and germicide used to control bacteria, yeasts, and
fungi. | [Fire Hazard]
Combustible material: may burn but does not ignite readily. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form. | [First aid]
If this chemical gets into the eyes, remove any
contact lenses at once and irrigate immediately for at least
15 minutes, occasionally lifting upper and lower lids. Seek
medical attention immediately. If this chemical contacts the
skin, remove contaminated clothing and wash immediately
with soap and water. Seek medical attention immediately.
If this chemical has been inhaled, remove from exposure,
begin rescue breathing (using universal precautions) if
breathing has stopped, and CPR if heart action has stopped.
Transfer promptly to a medical facility. When this chemical
has been swallowed, get medical attention. Do not induce
vomiting when formulations containing petroleum solvents
are ingested. Otherwise, give large quantities of water and
induce vomiting. Do not make an unconscious person
vomit. | [Shipping]
UN2669 Chlorocresols solution, Hazard Class:
6.1; Labels: 6.1-Poisonous materials. UN3437 Chlorocresols
solid, Hazard Class: 6.1; Labels: 6.1-Poisonous materials. | [Incompatibilities]
Chlorocresols react with boranes, alkalies, aliphatic amines, amides, nitric acid, sulfuric acid.
Contact with oxidizing agents may cause a fire and explosion hazard. Heat produces phosgene, hydrogen chloride
and chlorine gases. Corrosive to aluminum, copper, tin, and
other chemically active metals. | [Waste Disposal]
A good candidate for rotary
kiln incineration at a temperature range of 820 to 1600C
and residence times of seconds for liquids and gases, and
hours for solids. | [Physical properties]
Colorless, white, or pinkish crystals with a slight phenolic odor. On exposure to air it slowly
becomes light brown. | [Definition]
ChEBI: 4-chloro-m-cresol is a hydroxytoluene that is 3-methylphenol which is substituted by a chlorine at position 4. A ryanodine receptor agonist. It has a role as a ryanodine receptor agonist, an antimicrobial agent and a disinfectant. It is a hydroxytoluene and a member of monochlorobenzenes. | [Production Methods]
Chlorocresol is prepared by the chlorination of m-cresol. | [Pharmaceutical Applications]
Chlorocresol is used as an antimicrobial preservative in cosmetics
and pharmaceutical formulations. It is generally used in concentrations
up to 0.2% in a variety of preparations except those intended
for oral administration or that contact mucous membrane.
Chlorocresol is effective against bacteria, spores, molds, and yeasts;
it is most active in acidic media. Preservative efficacy may be
reduced in the presence of some other excipients, particularly
nonionic surfactants. | [Side effects]
Chlorocresol is used as a preservative in a variety of topical preparations, such as corticosteroid creams and moisturizers and in disinfectants and detergents. Three case reports implicate chlorocresol as a cause of Cou; however, whether this is due to an immunological cause is uncertain.
Walker et al. report a patient who experienced localized Cou to a number of topical medicaments and moisturizers within 30 minutes of application. Patch tests of chlorocresol and her own preparations containing chlorocresol applied for just 30 minutes produced marked urticarial responses.
A woman working in an aviary developed eyelid edema and erythema every time she used two specific disinfectants. Open and skin prick testing to 10%, but not 1%, chlorocresol was positive in this case and negative in 10 controls. This patient also experienced eyelid involvement as well as local reactions to the testing, both with superficial necrosis. Freitas et al. acknowledged that it was unusual on both aspects: for such a high concentration to be required to elicit an urticarial reaction and for superficial necrosis to occur.
A case of simultaneous delayed and immediate hypersensitivity has also been reported. Goncalo et al. report a 35-year-old laboratory worker exposed to chlorocresol in both detergents and corticosteroid creams. Patch testing was positive and the patient was diagnosed with allergic contact dermatitis to chlorocresol, which was present in numerous products. Open and skin prick testing to 1% and 5% chlorocresol were positive after 20 minutes. Ten controls were also tested, all were negative to the 1% formulation, although six were positive to 5%,[48] suspicious for a nonimmunological Cou. | [Safety]
Chlorocresol is used primarily as a preservative in topical
pharmaceutical formulations but has also been used in nebulized
solutions and ophthalmic and parenteral preparations. It should
not, however, be used in formulations for intrathecal, intracisternal,
or peridural injection.
Chlorocresol is metabolized by conjugation with glucuronic acid
and sulfate and is excreted in the urine, mainly as the conjugate,
with little chlorocresol being excreted unchanged.
Although less toxic than phenol, chlorocresol may be irritant to
the skin, eyes, and mucous membranes, and has been reported to
cause some adverse reactions when used as an excipient.
Sensitization reactions may follow the prolonged application of
strong solutions to the skin, although patch tests have shown that
chlorocresol is not a primary irritant at concentrations up to 0.2%.
Chlorocresol is recognized as a rare cause of allergic contact
dermatitis. Cross sensitization with the related preservative
chloroxylenol has also been reported. At concentrations of
0.005% w/v, chlorocresol has been shown to produce a reversible
reduction in the ciliary movement of human nasal epithelial cells in
vitro, and at concentrations of 0.1% chlorocresol produces
irreversible ciliostasis; therefore it should be used with caution in
nasal preparations. However, a clinical study in asthma patients
challenged with chlorocresol or saline concluded that preservative
might be used safely in nebulizer solution.
Chlorocresol is approved as safe for use in cosmetics in Europe at
a maximum concentration of 0.2%, although not in products
intended to come in contact with mucous membranes.
Chlorocresol at a concentration as low as 0.05% produces
ocular irritation in rabbits. Despite such reports, chlorocresol
has been tested in ophthalmic preparations.
When used systemically, notably in a heparin injection preserved
with chlorocresol 0.15%, delayed irritant and hypersensitivity
reactions attributed to chlorocresol have been reported.
LD50 (mouse, IV): 0.07 g/kg
LD50 (mouse, oral): 0.6 g/kg
LD50 (mouse, SC): 0.36 g/kg
LD50 (rabbit, dermal): >5 g/kg
LD50 (rat, dermal): >2 g/kg
LD50 (rat, oral): 1.83 g/kg
LD50 (rat, SC): 0.4 g/kg | [Environmental Fate]
Biological. When p-chloro-m-cresol was statically incubated in the dark at 25 °C with yeast
extract and settled domestic wastewater inoculum, significant biodegradation with rapid
adaptation was observed. At concentrations of 5 and 10 mg/L, 78 and 76% biodegradation,
respectively, were observed after 7 d (Tabak et al., 1981).
Chemical/Physical. At influent concentrations (pH 3.0) of 1.0, 0.1, 0.01, and 0.001 mg/L, the
GAC adsorption capacities were 122, 63, 32, and 17 mg/g, respectively. At pH 5.5 and pH 9.0 at
influent concentrations of 1.0, 0.1, 0.01, and 0.001 mg/L, the GAC adsorption capacities were 124,
85, 58, and 40 mg/g and 99, 38, 15, and 5.5 mg/g, respectively (Dobbs and Cohen, 1980). | [storage]
Chlorocresol is stable at room temperature but is volatile in steam.
Aqueous solutions may be sterilized by autoclaving. On exposure to
air and light, aqueous solutions may become yellow colored.
Solutions in oil or glycerin may be sterilized by heating at 1608℃ for
1 hour. The bulk material should be stored in a well-closed
container, protected from light, in a cool, dry place. | [Purification Methods]
Crystallise the phenol from pet ether or *C6H6. [Beilstein 6 H 381, 6 I 187, 6 II 355, 6 III 1315, 6 IV 2064.] | [Regulatory Status]
Included in the FDA Inactive Ingredients Database (topical creams
and emulsions). Included in nonparenteral and parenteral medicines
licensed in the UK. Included in the Canadian List of Acceptable
Non-medicinal Ingredients.
In Europe, chlorocresol is approved for use in cosmetics at a
maximum concentration of 0.2%; however, it is prohibited for use
in products intended to come into contact with mucous membranes.
In Japan, use of chlorocresol in cosmetics is restricted to a level of
0.5 g/100 g. |
| Safety Data | Back Directory | [Hazard Codes ]
Xn,N,T,F | [Risk Statements ]
R21/22:Harmful in contact with skin and if swallowed .
R41:Risk of serious damage to eyes.
R43:May cause sensitization by skin contact.
R50:Very Toxic to aquatic organisms.
R39/23/24/25:Toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed .
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R11:Highly Flammable.
R38:Irritating to the skin. | [Safety Statements ]
S26:In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection .
S61:Avoid release to the environment. Refer to special instructions safety data sheet .
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S36/37:Wear suitable protective clothing and gloves .
S16:Keep away from sources of ignition-No smoking .
S7:Keep container tightly closed .
S28:After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer) . | [RIDADR ]
UN 3077 9/PG 3
| [WGK Germany ]
2
| [RTECS ]
GO7100000
| [Autoignition Temperature]
590 °C | [TSCA ]
Yes | [HazardClass ]
6.1(a) | [PackingGroup ]
II | [HS Code ]
29081000 | [Safety Profile]
Poison by intravenous,
subcutaneous, and intraperitoneal routes.
Moderately toxic by ingestion. An allergen.
Mutation data reported. Incompatible with
sodium hydroxide. When heated to
decomposition it emits toxic fumes of Cl
and phosgene. See also CRESOL and
CHLOROPHENOLS. | [Hazardous Substances Data]
59-50-7(Hazardous Substances Data) | [Toxicity]
LD50 orally in Rabbit: 1830 mg/kg LD50 dermal Rat > 2000 mg/kg |
|
|