| Identification | More | [Name]
Chloroacetonitrile | [CAS]
107-14-2 | [Synonyms]
AKOS BBS-00004385
CHLOROACETONITRILE
CHLOROETHANENITRILE
CHLOROMETHYL CYANIDE
2-Chloroacetonitrile
Acetonitrile,chloro-
alpha-Chloroacetonitrile
CH2ClCN
Chloracetonitrile
chloro-acetonitril
Chlorocyanomethane
dichloroethanenitrile
Monochloroacetonitrile
Monochloromethyl cyanide
monochloromethylcyanide
USAF kf-5
usafkf-5
Chloroacetonitrile, 98+%
Chloroacetonitrile ,99% | [EINECS(EC#)]
203-467-0 | [Molecular Formula]
C2H2ClN | [MDL Number]
MFCD00001885 | [Molecular Weight]
75.5 | [MOL File]
107-14-2.mol |
| Chemical Properties | Back Directory | [Appearance]
A clear, colorless liquid. Pungent odor. | [Melting point ]
38℃ | [Boiling point ]
124-126 °C (lit.) | [density ]
1.193 g/mL at 25 °C(lit.)
| [vapor density ]
3 (vs air)
| [vapor pressure ]
1.78 psi ( 20 °C)
| [refractive index ]
n20/D 1.422(lit.)
| [Fp ]
118 °F
| [storage temp. ]
2-8°C | [solubility ]
Chloroform, Ethyl Acetate | [form ]
Liquid | [color ]
Clear colorless | [Stability:]
Stable, but reacts with water. Combustible. Incompatible with water, moisture, strong oxidizing agents, acids. | [Water Solubility ]
INSOLUBLE | [Detection Methods]
GC,NMR | [BRN ]
506028 | [Dielectric constant]
30.0 | [Exposure limits]
NIOSH: IDLH 14 ppm(25 mg/m3) | [InChIKey]
RENMDAKOXSCIGH-UHFFFAOYSA-N | [LogP]
0.45 | [Uses]
Fumigant, intermediate. | [CAS DataBase Reference]
107-14-2(CAS DataBase Reference) | [IARC]
3 (Vol. 52, 71) 1999 | [NIST Chemistry Reference]
Acetonitrile, chloro-(107-14-2) | [EPA Substance Registry System]
107-14-2(EPA Substance) |
| Safety Data | Back Directory | [Hazard Codes ]
T,N | [Risk Statements ]
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed .
R51/53:Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment . | [Safety Statements ]
S45:In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) .
S61:Avoid release to the environment. Refer to special instructions safety data sheet . | [RIDADR ]
UN 2668 6.1/PG 2
| [WGK Germany ]
3
| [RTECS ]
AL8225000
| [TSCA ]
Yes | [HazardClass ]
6.1 | [PackingGroup ]
II | [HS Code ]
29269095 | [Safety Profile]
Poison by ingestion,
skin contact, and intraperitoneal routes.
Moderately toxic by inhalation. A skin
irritant. Human mutation data reported.
Questionable carcinogen with experimental
tumorigenic data. Flammable liquid. See also
NITRILES. When heated to decomposition
it emits very toxic fumes of Cl-, NOx, and
CN-. | [Hazardous Substances Data]
107-14-2(Hazardous Substances Data) | [IDLA]
14 ppm |
| Raw materials And Preparation Products | Back Directory | [Raw materials]
Ethyl chloroacetate-->Chloroacetamide | [Preparation Products]
2-Phenoxyethylamine-->4-Methyl-1-piperazineethanamine-->2-(2,3-DIHYDRO-1BENZENESULFONYL-PYRROLO[2,3-B]PYRIDIN-3-YL)ETHANAMINE-->2-(2,3-DIHYDRO-1-BENZENESULFONYL-PYRROLO[2,3-B]PYRIDIN-3-YL)ACETONITRILE-->2-PHENOXYACETAMIDINE HYDROCHLORIDE-->1-PROPANESULPHONYLACETONITRILE-->2-PHENOXYETHANIMIDAMIDE HYDROCHLORIDE DIHYDRATE-->2-(CHLOROMETHYL)-6-ETHYLTHIENO[2,3-D]PYRIMIDIN-4(3H)-ONE-->1-(2-AMINOETHYL)-4-BENZYLPIPERAZINE-->2-(Chloromethyl)-6-methylthieno[2,3-d]pyrimidin-4(3H)-one ,97%-->2-(4-METHYL-PIPERIDIN-1-YL)-ETHYLAMINE-->2-(CHLOROMETHYL)-5-METHYLTHIENO[2,3-D]PYRIMIDIN-4(3H)-ONE-->1-[2-(MORPHOLIN-4-YL)-ETHYL]-PIPERAZINE-->CYANOMETHYLENETRIBUTYLPHOSPHORANE-->N-(2-Aminoethyl)piperidine-->4-CHLORO-2-CHLOROMETHYLQUINAZOLINE-->Phentolamine mesilate-->Acetonitrile, (2-benzothiazolylthio)- (8CI,9CI)-->1,3-Benzenediol, 4-(2-chloro-1-iminoethyl)- |
| Hazard Information | Back Directory | [General Description]
A colorless liquid with a pungent odor. Flash point 118°F. Insoluble in water and denser than water. Hence, sinks in water. Very toxic by ingestion, inhalation and skin absorption. A lachrymator. Used to make other chemicals and as a fumigant. | [Reactivity Profile]
CHLOROACETONITRILE(107-14-2) reacts with water, steam, strong acids or acid fumes to produce toxic vapors of hydrogen chloride. When heated to decomposition, CHLOROACETONITRILE(107-14-2) emits highly toxic fumes of hydrogen cyanide and hydrogen chloride [Sax, 2nd ed., 1963, p. 600]. | [Air & Water Reactions]
Flammable. Insoluble in water and denser than water. Hence, sinks in water. Reacts with water and steam to produce toxic vapors of hydrogen chloride. | [Hazard]
Irritant. Questionable carcinogen. | [Health Hazard]
TOXIC; may be fatal if inhaled, ingested or absorbed through skin. Inhalation or contact with some of these materials will irritate or burn skin and eyes. Fire will produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control or dilution water may cause pollution. | [Potential Exposure]
A chlorinated haloacetonitrile used as
a fumigant and as a manufacturing chemical intermediate
for making other chemicals | [Fire Hazard]
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion and poison hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. | [First aid]
Eyes: First check the victim for contact lenses
and remove if present. Flush victim’s eyes with water or
normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not
put any ointments, oils, or medication in the victim’s eyes
without specific instructions from a physician. Immediately
transport the victim after flushing eyes to a hospital even if
no symptoms (such as redness or irritation) develop. Skin:
Immediately flood affected skin with water while removing
and isolating all contaminated clothing. Gently wash all
affected skin areas thoroughly with soap and water. If
symptoms such as redness or irritation develop,
Immediately call a physician and be prepared to transport
the victim to a hospital for treatment. Inhalation:
Immediately leave the contaminated area; take deep breaths
of fresh air. If symptoms (such as wheezing, coughing,
shortness of breath, or burning in the mouth, throat, orchest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory
protection to rescuers entering an unknown atmosphere.
Whenever possible, SCBA should be used; if not available,
use a level of protection greater than or equal to that
advised under Protective Clothing. Ingestion: do not induce
vomiting. If the victim is conscious and not convulsing,
give 1 or 2 glasses of water to dilute the chemical and
Immediately call a hospital or poison control center. Be
prepared to transport the victim to a hospital if advised by
a physician. If the victim is convulsing or unconscious, do
not give anything by mouth, ensure that the victim’s airway
is open and lay the victim on his/her side with the head
lower than the body. Do not induce vomiting. Immediately
transport the victim to a hospital.
| [Shipping]
UN2668 Chloroaceto nitrile Hazard class: 6.1,
Labels: 6.1-Poison Inhalation Hazard, 3-Flammable liquid
Inhalation Hazard Zone B. | [Incompatibilities]
Highly flammable, forms explosive mixture with air. Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases,
strong acids, oxoacids, epoxides. Reacts with water and
steam, releasing toxic and corrosive vapors of hydrogen
chloride. Nitriles may polymerize in the presence of metals
and some metal compounds. They are incompatible with
acids; mixing nitriles with strong oxidizing acids can lead
to extremely violent reactions. Nitriles are generally incompatible with other oxidizing agents such as peroxides and
epoxides. The combination of bases and nitriles can produce hydrogen cyanide. Nitriles are hydrolyzed in both
aqueous acid and base to give carboxylic acids (or salts of
carboxylic acids). These reactions generate heat. Peroxides
convert nitriles to amides. Nitriles can react vigorously low aqueous solubility. They are also insoluble in aqueous
acids.
with reducing agents. Acetonitrile and propionitrile are soluble in water, but nitriles higher than propionitrile have | [Waste Disposal]
Use a licensed professional
waste disposal service to dispose of this material. Dissolve
or mix the material with a combustible solvent and burn in
a chemical incinerator equipped with an afterburner and
scrubber. All federal, state, and local environmental regulations must be observed. | [Definition]
ChEBI: Chloroacetonitrile is a nitrile. | [Preparation]
In a 3-L round-bottomed, threenecked flask fitted with an efficient mechanical stirrer, a reflux condenser, and a thermometer were placed phosphorus pentoxide (170 g, 1.2 mol), chloroacetamide 1423 (187 g, 2 mol), and dry technical grade trimethylbenzene (800 mL). The mixture was gently refluxed with vigorous stirring for 1 h. It was then allowed to cool to about 100 C° with continuous stirring, and the reflux condenser was replaced with a distillation head fitted with a thermometer and a water-cooled condenser. The crude product and part of the solvent were distilled at atmospheric pressure. The yield of crude product boiling at 124–128 C° was 121–131 g (80–87%). In order to obtain a pure product, the crude chloroacetonitrile was mixed with phosphorus pentoxide (10 g) and redistilled through an efficient packed fractionating column. The yield of pure chloroacetonitrile distilling at 123–124 C° was 93–106 g (62–70%). | [Purification Methods]
Reflux it with P2O5 for one day, then distil it through a helices-packed column. Also purified by gas chromatography. [Beilstein 2 IV 492.] LACHRYMATOR, HIGHLY TOXIC. |
| Questions And Answer | Back Directory | [Product features]
Chloroacetonitrile, also known as "cyanide chloromethane" has its chemical formula being ClCH2CN and the molecular weight being 75.50. It is colorless and fuming liquid with the melting point being 38 ℃ and boiling point being 126~127 ℃ (decomposition), 30~32 ℃ (2.0kPa), the relative density being 1.1930 and the refractive index being 1.420225. It is soluble in ether, alcohol and hydrocarbons but insoluble in water. It is highly toxic. It can form adduct with aluminum trichloride and react with various kinds of reagents including phloroglucinol trimethylether, methoxyacetophenone, Grignard reagent and anhydrous hydrogen chloride. It can be obtained through the dehydration of chloroacetamide under the action of phosphorus pentoxide, or the reaction between excess amount of acetonitrile with chlorine at 460 ℃ as well as introducing ammonia gas into the ether solution of dichloro acetylene. Chloroacetonitrile can be used as a fumigant.
Fumigants refer to a kind of pesticides whose volatile vapor can be applied to poison and kill pests. Its gaseous molecules can enter into the body of the harmful organisms and exert toxic effects. It can also exist in forms being different from gas such as liquid, solid or compressed gaseous form. The usage dose can be calculated according to the volume of space fumigation place (unit: g/m 3). The applied concentration can be based on the fumigation period, the closeness extent of fumigation place and the amount of material as well as its absorption capability of fumigant vapor. It is suitable to be used in the closed or nearly closed conditions in places such as warehouse, tent, house, car, etc. In the case of large concentration of the object to be fumigated, it can effectively eliminate hidden pests or pathogens.
The fumigant vapor generally directly enters into the respiratory system through the skin or valve of the pests, thus penetrating into blood and cause the poisoning and death of pests. Its insecticidal effect is generally believed to be located in the chemical action on the enzyme. For example, methyl bromide can combine with thiol, causing gradually reversible or irreversible inhibitory effects on various kinds of enzymes inside the pest body. Phosphine can cause inhibition on the animal central nervous system, irritate the lungs and cause edema, resulting in swelling heart syndrome. Fumigants such as trichloroethane, dibromoethane and carbon tetrachloride are mainly narcotics while carbon dioxide mainly causes stifling effect.
This information is edited by Xiongfeng Dai from Chemicalbook.
| [Chemical Properties]
It is colorless, transparent fuming liquid with a pungent choking smell. It is soluble in alcohol and ether.
| [Uses]
1. It can be used as raw material of organic synthesis and analytical reagents.
2. It can be used as pharmaceutical intermediates, pesticides.
| [Production method]
It can be obtained through: chloroacetic acid is reacted with ethanol to generate ethyl chloroacetate, which then generate chloroacetamide through reaction with ammonia; finally have dehydration to get it. Detailed process: add trichloroacetic acid to the ethanol; add under stirring of concentrated sulfuric acid; the stirring was stopped after heating reflux; have the reaction for 8-10 h, filter and wash with water, separate out the water layer to obtain ethyl chloroacetate. Add it to the ammonia of 0-2 ℃ with the temperature being not exceed 15 ℃; sir for 10 to 15 mins after finishing adding added, cool, stand, filtrate and dry to obtain the chloroacetamide. Then, to the chloroacetamide, add phosphorus pentoxide and perform thermal dehydration with heating and distilling chloroacetonitrile out simultaneously; finally perform distillation under reduced pressure to evaporate out all the chloroacetonitrile. The resulting crude product is hydrated using phosphorus pentoxide and magnesium sulfate with vacuum distillation to derive the finished products.
| [Category]
Toxic substances.
| [Toxicity grading]
Highly toxic.
| [Acute toxicity]
Oral-rat LD50: 220 mg/kg; Oral-Mouse LD50: 139 mg/kg.
| [Irritation data]
Skin-Rabbit 14 mg/24 hr mild; Eye-Rabbit 20 mg/24 hours of moderate.
| [Flammable and hazardous characteristics]
Combustible upon fire with thermal decomposition into toxic nitrogen compounds, chloride and cyanide gas.
| [Storage characteristics]
Treasury: ventilated and low-temperature and dry; store it separately from oxidants, acids and food additives.
| [Extinguishing agent]
Dry powder, carbon dioxide and sand. pH extinguishing agent should be disabled. |
|
|