成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

Welcome to chemicalbook!
Chinese English Japanese Germany Korea
400-158-6606
Try our best to find the right business for you.
Do not miss inquiry messages Please log in to view all inquiry messages.

Welcome back!

ChemicalBook CAS DataBase List Nickel
7440-02-0

Nickel synthesis

2synthesis methods
The carbonyl process is most commonly employed when very pure nickel is required. The impure metal is reacted with pure carbon monoxide at 50° and the carbonyl produced fractionated several times prior to pyrolysis at around 200°. The nickel thus obtained has a purity of 99.90-99.99% depending upon the materials used.
Electrolytic methods for producing high purity nickel depend upon the production of high purity nickel salts. The nickel obtained by the electrolysis of pure nickel chloride solution with inert platinum-iridium anodes is 99.99% pure.
-

Yield:-

Reaction Conditions:

with formic acid at 225 - 400; under 0.750075 - 1.50015 Torr;Inert atmosphere;

Steps:

5

Nickel Film Deposition. An R-75 ALD reactor manufactured by PicosunOy was used for thin film deposition experiments. The reactor was operated under a flow of nitrogen at a pressure of 1-2 mbar. The deposition of copper metal films by ALD was studied by employing bis(N',N'- dimethylpivalohydrazato)nickel(ll), (NiL2), as the copper source and formic acid as the reducing agent. In initial growth trials, the sublimation temperature of NiL2 was found to be optimum at 105 0C at the reactor pressure. The substrate temperatures were held between 225 and 400 0C. Nitrogen was used as both the carrier and purge gas and was obtained for air using a Taxol GeniSys nitroGenerator. Deposition experiments were performed using a range of NiL2 pulse lengths (0.5-5.0 seconds), formic acid pulse (0.1-3.0 seconds), and nitrogen purge lengths (3.0-5.0 seconds) to determine the extent of surface saturation. Films were deposited on Si(100) with and without HF treatment, Corning Eagle XG glass, and TaN substrates obtained from Silicon Quest International. One substrate, one quarter of a 3-inch wafer, was used in each deposition experiment.

References:

WO2010/132871,2010,A1 Location in patent:Page/Page column 42

Nickel Related Search: