成人免费xx,国产又黄又湿又刺激不卡网站,成人性视频app菠萝网站,色天天天天

Welcome to chemicalbook!
Chinese English Japanese Germany Korea
400-158-6606
Try our best to find the right business for you.
Do not miss inquiry messages Please log in to view all inquiry messages.

Welcome back!

ChemicalBook CAS DataBase List ACETONE-D6
666-52-4

ACETONE-D6 synthesis

7synthesis methods

Acetone-d6 is mainly used as nuclear magnetic resonance reagent, pharmaceutical and synthesis, photoelectric material modification, laboratory special reagent, chemical, scientific research, detection, etc. Preparation of Acetone-d6 is that Acetone and Heavy Water act with H-D Exchange under the Action of Alkaline Catalyst (LiOD).

-

Yield:-

Reaction Conditions:

with deuterium at 249.84;Kinetics;Thermodynamic data;Flow reactor;Reagent/catalyst;

Steps:

2.2. Catalytic rate measurements
The reactions of gaseous C2-C4 carboxylic acids (ethanoic acid(CH3COOH, >99.7%, Sigma-Aldrich), propionic acid (C2H5COOH,>99.5%, Sigma-Aldrich), and butanoic acid (C3H7COOH, >99%,Sigma-Aldrich)) were carried out in an isothermal packed-bedreactor (1.0 cm I.D.) with plug-flow hydrodynamics at temperaturesbetween 503 K and 533 K. Experiments were carried out onTiO2(a), TiO2(r), ZrO2(m), and ZrO2(t) and on their respective physicalmixtures with 20 wt.% Cu/SiO2 co-catalysts (oxide/(Cu/SiO2) =0.5-2 mass); these mixtures were prepared by crushing andmixing the mixtures with a mortar and pestle and then pressedinto wafers, crushed, and sieved to retain 125-180 lm aggregates.The mixtures were then treated in flowing 10% H2/He(5.56 cm3 g-1 s-1, 99.999%, Praxair) by heating to 543 K (at0.0833 K s-1) and holding for 2 h within the reactor before catalyticmeasurements. Liquid carboxylic acids were introduced using asyringe pump (Cole Parmer, 74900 series) at 433 K into a flow ofH2-He mixtures (20 kPa H2, 99.999%, Praxair) metered using electronicmass flow controllers (Porter, Inc.). All lines were kept at433 K to prevent condensation of reactants and products. Isotopicdata were obtained using the same procedures and ethanoicacid-d4 (CD3COOD, >99%, Sigma-Aldrich) and D2 (>99%, Praxair)as reactants.

References:

Wang, Shuai;Iglesia, Enrique [Journal of Catalysis,2017,vol. 345,p. 183 - 206]

ACETONE-D6 Related Search: