Yield:38585-62-5 94%

Reaction Conditions:

with ammonium chloride;sodium in methanol;ethanol;ammonia;water;isopropyl alcohol;acetone

Steps:

3 EXAMPLE 3
After the ammonia was collected, sodium (335 g., 15.23 m.) was added in portions and dissolved in the ammonia giving a deep blue solution. The addition of sodium required about 15 minutes. 5-Methyl-4-imidazolecarboxylic acid ethyl ester (500 g., 3.25 m.) was added to 400 ml. of dry ethanol giving a wet powder. This wet powder was added portionwise with caution to the sodium-ammonia solution over a period of about 30 minutes. After the addition was completed, one liter of methanol was added carefully. Ammonium chloride (810 g., 15.28 m.) was added very cautiously until the blue color was discharged whereupon the remaining ammonium chloride could be added more rapidly. After the addition of the ammonium chloride, the ammonia was evaporated using a cold water heating bath. As the volume of the mixture decreased, the heating bath was made warmer. When nearly all the ammonia was gone, the mixture was heated with steam under a vacuum to remove the last traces of ammonia. The removal of ammonia requires 7-15 hours. Isopropanol (6 liters) was added to the residue and refluxed for one hour with vigorous stirring. Water (100 ml.) was then added and the stirring continued for 10 minutes. The mixture was then cooled to about 40° C. and acidified with hydrogen chloride gas and filtered. The filter cake was washed with hot isopropanol and the combined filtrate concentrated to about one liter and diluted with 4 liters of acetone and 2 liters of ethyl ether. The product was collected and dried at 60° C. under vacuum to give 4-(hydroxymethyl)-5-methylimidazole hydrochloride, yield 94 percent.

References:

SK&F Lab Co. US4063023, 1977, A

FullText