艾浩爾防霉抗菌科技有限公司

防霉工程部：林先生

手機：15013134055

qq：1515992677

郵箱：1515992677@qq.com

電話：+86-020-86210762

傳真：+86-020-86210731

iHeir-JS膠水防護處理技術

——水性膠水敏感性配方專用防霉抗菌劑

  iHeir-JS膠水防霉劑是一種高效、無毒殺菌劑，適用于高分子聚合物乳液及各類水性粘合劑。亦可用于抑制細菌和真菌在生產和存儲膠水和其它含水有機產品中的滋生。iHeir-JS已經被廣泛用于大容量存儲乳液的抗菌防腐上。美國環境保護署（EPA）已批準登記iHeir-JS為水性膠水和涂料的罐內抗菌防腐劑。大量的實驗及實際應用證明iHeir-JS對丙烯酸、聚醋酸乙烯粘合劑、聚苯乙烯丁酯以及其它共聚物有極好的防霉防腐功能，并且與這些產品中的有機和無機物成分有著極好的相容性。

iHeir-JS的特性

主要化學成份：

物理性質：

iHeir-JS使用方法及用量

1.iHeir-JS膠水防霉劑產品的供應形式為液體，易于混合。實驗證明iHeir-JS的防霉防腐效果不會因不同的加入點而受到影響。iHeir-JS可以直接在膠水研磨、包裝前或使用膠水前加入。為確保加入iHeir-JS后的均勻分散，必須將乳液和水性粘合劑充分?jǐn)嚢瑁ńㄗh按1.0%-2.0%比例添加）。

2. 配合微生物膠囊技術加工在包裝材料上，其活性成分的濃度取決于產品的大小或空間的大小。

包裝及貯存：

25和160公升兩種規格，請將iHeir-JS膠水防霉劑存放在常溫室內空氣流通處，請勿用無內襯的金屬容器來裝本品。在普通存儲溫度下，該產品最少有一年的穩定期。

適當?shù)厥褂胕Heir-JS較之使用其他殺菌劑有以下優點：

1. 廣譜抗菌作用：可同時抑制細菌(包括格蘭氏陰性、陽性細菌)和真菌(酵母菌、霉菌等)。

2. 成本低：成本(有效使用濃度)比一般市場上的抗菌防腐劑為低，且使用簡便。

3. 在建議使用濃度下無毒，并且不含甲醛或甲醛釋放物。

4. 優異的物理及化學相容性，對成品無副作用。

5. 有效活性濃度低，對環境友好。

IHEIR-JS 膠水防霉劑

【產品型號】iHeir-JS 【產品規格】25KG/桶 【外觀顏色】透明無色 【包裝規格】5KG/25KG/160KG

【主要用途】iHeir-JS膠水防霉劑 是一種高效、低毒殺菌劑，適用于乳膠漆、高分子聚合物乳液、顏料漿及各類水性涂料。亦可用于抑制細菌和真菌在生産和存儲印刷油墨和其他含水有機産品中的滋生。

包裝規格 Packaging Specification 

iHeir-JS膠水防霉劑采用25L藍色四方塑料桶包裝，最小包裝為5KG(L)包裝，請將本產品放在陰涼干燥的地方，且兒童不宜接觸，避免接觸到口、鼻、眼睛等，如接觸到眼睛或口鼻，請立即用大量清水沖洗。

注意事項：本產品屬于環保產品,但不排除個別人會產生過敏現象,因此建議使用橡膠手套和口罩操作,若不慎皮膚與藥劑接觸,可使用肥皂水清洗,產品若滴入眼中,應立即使用清水沖洗,若比較嚴重者,建議立即就醫.

膠水防霉劑；白乳膠防霉劑；供應防霉劑廠家；防霉劑優質廠家；防霉劑那就好；艾浩爾防霉劑放心品牌；膠水防霉添加助劑；白乳膠防霉助劑

Supply department: no 38, stone west street, Baiyun district, Guangzhou city, Guangdong province
Aihaoer mould proof anti - bacterial science and technology co., ltd

Mould proof engineering: Mr Lin

Cell phone: 15013134055
Qq: 1515992677

Email: 1515992677 @ QQ

Tel: + 86 - 020 - 86210762

Fax: + 86 - 020 - 86210731

Protection - js glue protection treatment technology

- the sensitivity antibacterial agent for the sensitivity formula of water - borne glue

' - js glue is an efficient and non-toxic bactericide, suitable for polymer emulsion and various kinds of waterborne adhesives. It can also be used to inhibit the growth of bacteria and fungi in the production and storage of glue and other aqueous organic products. I - js has been widely used in the antimicrobial preservation of large capacity storage emulsions. The United States environmental protection agency ( EPA ) has approved the registration of' - js as an antibacterial preservative in a tank of water-based glue and paint. A large number of experiments and practical applications show that' - js has excellent anti - corrosion function for acrylic acid, polyvinyl acetate adhesive, butyl polystyrene and other copolymers, and has excellent compatibility with organic and inorganic components in these products. 

I characteristics of the' - js

Main chemical constituents:

5 - chloro - 2 - methyl - 4 - strange - 3 - one

40 per cent

2 - methyl - 4 - strange - 3 - one

15 per cent



Physical properties:

Active ingredient concentration:

Forty - five per cent

Viscosity ( 25 c ):

3c PS

Appearance

Transparent colourless liquid

Specific gravity ( 25 c ):

1. 02 ( 1 )

Smell

Soft fragrance

Solubility ( water ):

It can be mixed with each other

Ph:

6 - 7

Solubility ( organic solvents ):

Soluble in most organic solvents



The use of' - js and its usage

1. the supply of the' - js Glue products is liquid and is easy to mix. The experimental results show that the mould proof - js effect of mould proof - js will not be affected by different points of entry. ' - js can be added directly before the glue grinding, packaging or using glue. In order to ensure the uniform dispersion of the' - js, the emulsion and water-based adhesive must be fully stirred ( recommended to be added at 1.0 % - 2.0 % ). 

2. the concentration of the active ingredient in the packaging material depends on the size or the size of the product. 

Packaging and storage:

25 and 160 litres of the two specifications, please keep the' - js glue fungicide in the room temperature room air circulation, do not use the metal metal container to install this product. At the ordinary storage temperature, the product has at least one year of stability. 

The appropriate use of' - js has the following advantages over the use of other fungicides:

1. broad - spectrum antibacterial action: simultaneous inhibition of bacteria ( including gram - negative, positive bacteria ) and fungi ( yeast, mold, etc. ). 

2. low cost: the cost ( effective use concentration ) is lower than the antimicrobial preservative in the general market and is simple to use. 

3. it is not toxic at the recommended use concentration, and does not contain formaldehyde or formaldehyde release. 

4. excellent physical and chemical compatibility, no side effects on the finished product. 

5. low effective activity concentration and friendly to environment. 

I - js Glue fungicide

[ product model ] I - js [ product specification ] 25 / barrel [ appearance color ] transparent and colorless [ packaging specification ] 5 kg / 25 kg / 160 kg

【 main use 】 I - js glue fungicide is an efficient and low toxicity bactericide, which is suitable for latex paint, polymer emulsion, pigment slurry and various kinds of waterborne coatings. It can also be used to inhibit the growth of bacteria and fungi in the production and storage of printing inks and other aqueous organic products. 

Packaging specification packaging specification

' - js glue mould inhibitor is packed in 25l blue square bucket, the minimum packing is 5 kg ( l ) packing, please put this product in a cool and dry place, and children should not contact, avoid contact to mouth, nose, eyes, etc., such as contact eyes or nose and mouth, please wash with plenty of water immediately. 

Note: this product belongs to environmental protection products, but do not exclude others will produce allergy, so it is recommended to use rubber gloves and face mask operation, if the skin and pharmaceutical contact, can use soapy water to wash, if the product drops into the eyes, should be immediately flush with clean water, if more serious, recommend immediate medical treatment.