Product name：Polyester modified silicon resin IOTA-1062G

Characteristics

This product has a relatively excellent resistance to high and low temperature, hydrophobic moisture resistance and good electrical insulation properties, arc resistance corona performance. Its weather resistance and chemical stability, corrosion resistance is also very good.
Apply
It is recommended as the base resin for temperature-resistant non-stick coatings and special coatings for household appliances such as frying pans, rice cookers, ovens, ovens, toasters, electric irons, range hoods, and gas stoves.

Data

Appearance: Colorless transparent liquid

Solid content: 57±1%
Acid value: ≤4 mg KOH/g

Varnish film hardness: ≥5H
Viscosity: ≥ 100 seconds (No 4 cup, 25℃)

Packing

 25kg white iron drum, 200kg white iron drum  

Storage

 This product should be stored in ventilated, cool, dry place to prevent direct sunlight exposure; to prevent serious pollution of acid, lye, and should be cut off from sources of ignition away from heat, the product storage period is six months.

Notes

The diluting solvent used in this product should not contains water, pyridine sulfur-containing compounds and impurities, otherwise it will affect the resin film adhesion, dry and other properties.

The processing equipment, utensils must be clean during the production process. To prevent dust、foreign matter and water.

There will be a lot of xylene and other flammable, toxic solvents evaporate during the production process, we should pay special attention to strengthening the field of ventilation, attention to fire safety, strict cut off the source of fire. The operator should pay attention to labor protection.
The products such as acid、alkali、salt of organic acid amine compounds has Accelerate the solidification effectiveness for this product, and will influence the heat resistance and electrical properties. So, this product should be isolated with those products when storing.