| Identification | Back Directory | [Name]
Poly(diallyldimethylammonium chloride) | [CAS]
26062-79-3 | [Synonyms]
e261
pbk1
cp261
261lv
vpk402
pas-h10
cp261lv
PDADMAC
cat-floc
merck261
lectrapel
calgon261
merquat100
percol1697
polymer261
calgon261lv
ageflocwt20
PDADMAC 40%
polymer261lv
quaternium40
polyquaternium6
calgonpolymer261
Elionfix FN-H conc
conductivepolymer261
Cationic polyMer flocculant
poly(diallyldimethylammonium
HOMOPOLYMEROFDIALLYLDIMETHYLAMMONIUM
DIMETHYLDIALLYLAMMONIUMCHLORIDEPOLYMER
Diallylmethylammonium chloride polymer
POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE)
diallyldimethylammoniumchloridepolymers
DIALLYLDIMETHYLAMMONIUM CHLORIDE POLYMER
poly(n,n-dimethyldiallylammoniumchloride)
ammonium,diallyldimethyl-,chloride,polymers
Poly(diallyldiMethylaMMoniuM chloride) solu
diallyldimethylammonium chloride homopolymer
poly-n,n-dimethyl-n,n-diallylammoniumchloride
Poly(diallyldiMethyl aMMoniuM chloride) PDMDAAC
poly(diallyldimethylammonium chloride) solution
Poly(DiallyldiMethylaMMoniuM Chloride) Dry Powder
Poly(diallyl dimethyl ammonium chloride) (solid)
poly(diallyldimethylammoniumchloride)(40%inwater)
Poly(diallyldimethylammonium chloride) PDADMAC 40%
Poly2-propen-1-aminium,N,N-dimethyl-N-2-propenyl-,chloride
Poly(Dimethyl Diallyl Ammonium Chloride) Series, PolyDADMAC
Poly(diallyldiMethylaMMoniuM chloride) solution 20 wt. % in H2O
N,N-DIMETHYL-N-2-PROPENYL-2-PROPEN-1-AMMONIUMCHLORIDE,HOMOPOLYMER
Diallyldimethylammonium chlorid polymer, Viskositt ca. 9000 mPa s
n,n-dimethyl-n-2-propenyl-2-propen-1-aminium chloride homopolymer
2-Propen-1-aminium,N,N-dimethyl-N-2-propenyl-,chloride,homopolymer
2-PROPEN-1-AMMONIUM,N,N-DIMETHYL-N-2-PROPENYL-,CHLORIDE,HOMOPOLYMER
Diallyldimethylammonium chlorid polymer, Viskositt 1000 - 3000 mPa s
POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE),VERY LOWMOLECULAR WT, 35 WT. % IN H20
POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE), HI MOLECULAR WEIGHT, 20 WT % IN WATER
POLY(DIALLYLDIMETHYLAMMONIUM CHLORIDE), LOW MOLECULAR WEIGHT, 20 WT % IN WATER
Poly(diallyldimethylammonium chloride) solution,40% in H2O,10000-20000 cP(25℃)
Poly(diallyldiMethylaMMoniuM chloride) solution average Mw <100,000 (very low Molecular weight), 35 wt. % in H2O
Poly(diallyldiMethylaMMoniuM chloride) solution average Mw 400,000-500,000 (high Molecular weight), 20 wt. % in H2O
Poly(diallyldimethylammonium chloride) solution average Mw 200,000-350,000 (medium molecular weight), 20 wt. % in H2O | [EINECS(EC#)]
230-993-8 | [Molecular Formula]
C24H54Cl3N3X2 | [MDL Number]
MFCD00192409 | [MOL File]
26062-79-3.mol | [Molecular Weight]
491.06 |
| Hazard Information | Back Directory | [Chemical Properties]
liquid | [Uses]
Polyquaternium 6 is used as a coagulant aid in water treatment. | [General Description]
Poly(diallyldimethylammonium chloride) solution (PDADMAC) is a cationic polyelectrolyte that is widely utilized as a flocculant. It is prepared by the radical polymerization of diallyldimethylammonium chloride (DADMAC) in presence of a catalyst in the form of an organic peroxide. | [Synthesis]
The monomer DADMAC is formed by reacting two equivalents of allyl chloride with dimethylamine.Poly(diallyldimethylammonium chloride) is then synthesized by radical polymerization of DADMAC with an organic peroxide used as a catalyst. Two polymeric structures are possible when polymerizing DADMAC: N-substituted piperidine structure or N-substituted pyrrolidine structure. The pyrrolidine structure is favored.
Polymerization of Poly(diallyldimethylammonium chloride)
| [Purification Methods]
Precipitate it from water with acetone, and dry the salt in a vacuum for 24hours. [Hardy & Shriner J Am Chem Soc 107 3822 1985.] | [Toxics Screening Level]
The initial threshold screening level (ITSL) for polydimethyl diallyl ammonium chloride is 1000 μg/m3 (annual averaging time) based on the Michigan Department of Environmental Quality (MDEQ). |
|
|