| Identification | Back Directory | [Name]
POLYANILINE | [CAS]
25233-30-1 | [Synonyms]
Pani
Anirido
POLYANILINE
VERSICON(R)
Chebi:53198
Aniline polyMer
Conductive Polyaniline
POLYANILINE, WATER-SOLUBLE
poly(aniline) macromolecule
POLYANILINE ISO 9001：2015 REACH
POLYANILINE, LEUCOMERALDINE BASE
POLYANILINE, EMERALDINE BASE, AVERAGE M
LEB, Leucoemeraldine base polyaniline
Polyaniline (eMeraldine base) average Mw ~5,000
Polyaniline (eMeraldine base) average Mw ~50,000
Polyaniline (eMeraldine base) average Mw ~65,000
Polyaniline (emeraldine base) average Mw ~10,000
Polyaniline (emeraldine base) average Mw ~20,000
Polyaniline (eMeraldine base) average Mw ~100,000
Polyaniline, emerladine salt from hydrochloric acid
Polyaniline, emeraldine salt from hydrochloric acid
Polyaniline, emeraldine salt from p-toluenesulfonic acid
Polyaniline (emeraldine base),Emeraldine base polyaniline
Polyaniline (leucoemeraldine base),LEB, Leucoemeraldine base polyaniline | [EINECS(EC#)]
215-535-7 | [Molecular Formula]
(C6H7N)x | [MDL Number]
MFCD00284320 | [MOL File]
25233-30-1.mol | [Molecular Weight]
93.13 |
| Chemical Properties | Back Directory | [Melting point ]
>330 °C(lit.)
| [Boiling point ]
116 °C | [density ]
1.36 g/mL at 25 °C
| [refractive index ]
1.85 | [Fp ]
23 °C | [storage temp. ]
Keep in dark place,Sealed in dry,Room Temperature | [solubility ]
Soluble in sulfuric acid and methanesulfonic acid. | [form ]
powder (Infusible)
| [color ]
Dark green | [InChI]
InChI=1S/C6H7N/c7-6-4-2-1-3-5-6/h1-5H,7H2 | [InChIKey]
PAYRUJLWNCNPSJ-UHFFFAOYSA-N | [SMILES]
NC1C=CC=CC=1 |
| Hazard Information | Back Directory | [Description]
Polyaniline (PANI) is one kind of conductive polymer. It has shown great potential as supercapacitors electrode due to its advantages such as environment friendly, inexpensive, various redox states and excellent electrical conductivity (30–200 S cm? 1). Unfortunately, the solubility of PANI in all kinds of solvents is very poor. Thus, it is really hard to assemble the PANI into sensors. Referring to its chemical structure, many benzene ring structures exist in the molecular backbone, which induce adjacent molecules to form hydrogen bonds, resulting in a high rigidity. Therefore, even a low-concentration solution shows a strong gelation tendency[1].
| [Uses]
Conductive polymerPolyaniline is used in chemical vapor sensors, supercapacitors and biosensors. It is also useful for manufacture of electrical conducting yarns, antistatic coatings, electromagnetic shielding, flexible electrodes and printed circuit board. Further, it is used in antistatic and ESD coatings and corrosion protection. | [Definition]
ChEBI: A macromolecule composed of repeating imino-1,4-phenylene units. | [General Description]
Polyaniline (PAni) emeraldine salt can be prepared by protonation of PAni emeraldine base (PAni-EB). PAni-EB forms at pH>7. Its mechanism against corrosive agents has been explained in a study. | [Advantages]
Polyaniline (PANI) is one of the conducting polymers most used as an anti-corrosion coating. It has the following advantages over other conducting polymers: (1) it can be synthesized easily via chemical or electrochemical means, (2) it can be doped and undoped easily by treatment with aqueous acid and base, (3) it cannot be degraded easily, and (4) the aniline monomer is relatively cheap. The first report of its synthesis dates back to 1862, and its primary application was as a textile dye. It was only during the 1960s that PANI's electrical property was realized[2].
| [References]
[1] Deshmukh, Kalim et al. “Biopolymer Composites With High Dielectric Performance: Interface Engineering.”Biopolymer Composites in Electronics (2017): 27-128.
[2] Leon, A. and R. Advíncula. “Conducting Polymers with Superhydrophobic Effects as Anticorrosion Coating.” Intelligent Coatings for Corrosion Control (2015): 409-430.
|
|
|