| Identification | Back Directory | [Name]
Selenic acid, calcium salt (1:1) | [CAS]
14019-91-1 | [Synonyms]
Calcium Selenit
CALCIUM SELENATE
selenic acid, calcium salt
selenicacid,calciumsalt(1:1) | [EINECS(EC#)]
237-844-6 | [Molecular Formula]
CaH2O4Se | [MDL Number]
MFCD00049405 | [MOL File]
14019-91-1.mol | [Molecular Weight]
185.04 |
| Hazard Information | Back Directory | [Description]
Calcium selanate has the molecular formula of
CaSeO4 and the molecular weight of 201.0598 g/mol. It
can be prepared by reacting sodium selenate with
calcium chloride in solution:
CaCl2(aq)+ Na2SeO4(aq) ? CaSeO4+ 2NaCl(aq)
The result is calcium selenate dihydrate CaSe-
O4·2H2O whose CAS number is 7790-74-1. It is slightly
soluble in water at 9.22 g/100 ml at 20°C.
Evaporating the solution serves to form white, monoclinic
crystals whose molecular weight is 219.07 g/mol,
with a density of 2.75 g/cm3. | [Uses]
Amajor use for calciumselenate has been the formation
of CaSe by reduction with hydrogen gas. This salt is
readily available commercially by several manufacturers。 | [General Description]
White powder. | [Air & Water Reactions]
Water soluble | [Reactivity Profile]
Inorganic oxidizing agents can react with reducing agents to generate heat and products that may be gaseous (causing pressurization of closed containers). The products may themselves be capable of further reactions (such as combustion in the air). The chemical reduction of materials in this group can be rapid or even explosive, but often requires initiation (heat, spark, catalyst, addition of a solvent). Explosive mixtures of inorganic oxidizing agents with reducing agents often persist unchanged for long periods if initiation is prevented. Such systems are typically mixtures of solids, but may involve any combination of physical states. Some inorganic oxidizing agents are salts of metals that are soluble in water; dissolution dilutes but does not nullify the oxidizing power of such materials. Organic compounds in general have some reducing power and can in principle react with compounds in this class. Actual reactivity varies greatly with the identity of the organic compound. Inorganic oxidizing agents can react violently with active metals, cyanides, esters, and thiocyanates. Explosives often consist of an inorganic oxidizing agent mixed in intimate contact with a reducing agent. Gunpowder is such a mixture. Other examples are a mixture of sugar (an organic compound) plus sodium chlorate and magnesium (an inorganic reducing agent) plus barium peroxide. | [Health Hazard]
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. | [Fire Hazard]
Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Containers may explode when heated. Runoff may pollute waterways. |
|
|